Hello!
We start a new series of betas, with interesting changes:
10.5.3beta1:
--new route planner, with more data and options during planning
--new layer manager
--changes in the interface, icons,...
10.5.3beta2:
--tracks/waypoints in two columns in landscape
--minor changes
--bug corrections
10.5.3beta3:
--minor changes
10.5.3beta4:
--new 'tweak routes' and 'tweak track' options, to tweak fine grained the visibility of all the routes shown in the mapviewer and access their properties and different tools.
--minor changes
10.5.3beta5:
--minor changes
10.5.3beta6:
--minor changes
10.5.3beta7:
--added new map overlays (slopes and relief)
--added an option to modify maximum slope value when painting the route with slopes (settings->user interface->Tracks/lines,...->Colored paths with slope)
--other minor changes
10.5.3beta8:
--minor changes
10.5.3beta9:
--bug corrections
--some changes with the interface when following a route
--other minor changes
10.5.3beta10:
--bug corrections
--automatic night mode
--other minor changes
10.5.3beta11:
--bug corrections
10.5.3beta15:
--bug corrections
10.5.3beta16:
--bug corrections
10.5.3beta17:
--bug corrections
10.5.3beta18:
--bug corrections
orux
Happy New Year!
So happy to find this morning a New version of Oruxmaps.
The New version of the Route Planer is very nice.
Regards.
I agree: new Route Planer (used with Brouter) is wonderful !! Great work!
Only some little errors in italian translation ...
Great progress and good work. Thank you for everything you provide. I suggest adding the ability to change the .brf parameters so that, for example, it is possible to go via roads such as highway=track
With the old routeplaner when I used bicycle I could select between fast and shortest. Shortest was sticking mostly to the cycleroutes. With the new routplaner there is no such selection which makes it much more timeintense to create a new route
Great changes.
I propose the possibility of choosing a forma date in traces, eg 15.01.2024. or 15-01-2024. Now it is only 2014-01-15.
Quote from: abdullahosm on January 15, 2024, 08:27:57 AM
Great progress and good work. Thank you for everything you provide. I suggest adding the ability to change the .brf parameters so that, for example, it is possible to go via roads such as highway=track
Hello, it is true that it would be more comfortable to be able to do it from Oruxmaps directly, currently you can change the profile parameters in the brouter app, settings
It should also be noted that there is a new setting in the beta.
Track configuration, where you can choose the option to use the profiles proposed by orux or those you use in the brouter app.
Quote from: abdullahosm on January 15, 2024, 08:27:57 AM
Great progress and good work. Thank you for everything you provide. I suggest adding the ability to change the .brf parameters so that, for example, it is possible to go via roads such as highway=track
I pass you here the link to my telegram channel, it is a repository of brouter profiles by is of help.
https://t.me/BrouterExplorandoOruxmaps
Quote from: nur on January 15, 2024, 02:22:45 PM
With the old routeplaner when I used bicycle I could select between fast and shortest. Shortest was sticking mostly to the cycleroutes. With the new routplaner there is no such selection which makes it much more timeintense to create a new route
Hello, that's because you're using the profiles proposed by Oruxmaps.
In >tracks settings
You have an option to use profiles for brouter defects
This way you will have as before
Hello Orux,
first of all I want to thank you for constantly adding and developing great functions in Oruxmaps. The new route planner is absolutely great and so is the layer manager. The new layout in the tracks list offers a much better overview about the basic information of the tracks. And then there are small changes like the possibility to switch the coordinate format in the dashboard by long pressing and many others which make Oruxmaps the best app (imho) for hiking and cycling.
I have some suggestions for the route planner:
- You could add the possibility to switch between Oruxmaps and BRouter routing profiles directly in the route planner (see attached picture), so the route planner will be even more flexible.
- Maybe you could reduce the space between the symbols and the text a little bit, so that you can see more of the map even with the route planner drawer fully open (see attached picture).
- The straight line function should offer the possibility to add intermediate points automatically just like in the create by hand tool.
- In the tweaks menu an option to remember the tweaks settings would be great.
and another suggestion for the viewshed tool:
- The function to switch between the coloring of visible/non-visible areas in the ground overlay menu (where you can change the opacity) would be perfect.
Regards
Quote from: Lenz on January 18, 2024, 11:01:55 PM
Hello Orux,
first of all I want to thank you for constantly adding and developing great functions in Oruxmaps. The new route planner is absolutely great and so is the layer manager. The new layout in the tracks list offers a much better overview about the basic information of the tracks. And then there are small changes like the possibility to switch the coordinate format in the dashboard by long pressing and many others which make Oruxmaps the best app (imho) for hiking and cycling.
I have some suggestions for the route planner:
- You could add the possibility to switch between Oruxmaps and BRouter routing profiles directly in the route planner (see attached picture), so the route planner will be even more flexible.
- Maybe you could reduce the space between the symbols and the text a little bit, so that you can see more of the map even with the route planner drawer fully open (see attached picture).
- The straight line function should offer the possibility to add intermediate points automatically just like in the create by hand tool.
- In the tweaks menu an option to remember the tweaks settings would be great.
and another suggestion for the viewshed tool:
- The function to switch between the coloring of visible/non-visible areas in the ground overlay menu (where you can change the opacity) would be perfect.
Regards
Hello, I join your congratulations and observations!!
With a few small adjustments to the space and size of the elements that make up the planner boxes, the map display could be optimized, without losing any of the valuable information you give us.
And if possible, I would like the estimated time data to be saved along with the route as well.
Best regards!!
When installing from scratch, shouldn't Oruxmaps create the default virtual folders?
The current bera only creates the @all.
Hello Orux!!
The new layer manager is wonderful, it has taken a leap in quality!!
Knowing this:
When we load a polygonis or segments file, can we consult the individual statistics of the elements that compose it?
Currently, clicking on an overlapping segment opens the dialog box, but the statistics it offers are those of the entire file, not the individual segment.
Either in the diagligo box or in the layer drop-down menu, consulting the individual statistic would be very beneficial
Thank you
minor thing, but please make the color of steeper slopes more different (>20% should be black)
If it can be determined, after which android version can it be used 10.5? or should it be tried?
Thx!
Hello orux!!
I see that in the last two betas you have removed the buttons to add layers, draw layers, delete layers that were previously in the layer settings dropdown.
At first I didn't think much of it, but then I realized that I had replaced those 3 buttons on my keypad with the layer adjustment button.
Which gave me flexibility. I know that those features can be accessed in a variety of ways.
I don't know how this influences other users, I don't particularly Bother buttons.
Quote from: Tronpo on January 16, 2024, 02:37:43 PM
I pass you here the link to my telegram channel, it is a repository of brouter profiles by is of help.
https://t.me/BrouterExplorandoOruxmaps
Thank you, I put forth this proposal to make this process easier for the average user who does not know how to edit .brf files or place them in program folders.
There is a slight problem in the way the help displays the route plan, and this may be due to the language orientation. A video of the difference between these screens when the application language is in Arabic/English:
https://www.youtube.com/watch?v=v-t7q9ygLgc
https://www.youtube.com/watch?v=-ru3Kgljzqc
Quote from: abdullahosm on January 30, 2024, 07:31:00 AM
There is a slight problem in the way the help displays the route plan, and this may be due to the language orientation. A video of the difference between these screens when the application language is in Arabic/English:
https://www.youtube.com/watch?v=v-t7q9ygLgc (https://www.youtube.com/watch?v=v-t7q9ygLgc)
https://www.youtube.com/watch?v=-ru3Kgljzqc (https://www.youtube.com/watch?v=-ru3Kgljzqc)
Hello!
The links seems to be privata, I can not see them,
orux
Quote from: orux on January 30, 2024, 03:33:18 PM
Hello!
The links seems to be privata, I can not see them,
orux
Sorry about that, I fixed the links
Hi Orux, great job on all the new features.
I was wondering if you could add an option to show the slope map overlay with a quick toggle similar to the show/hide shadows overlay option, this way I wouldn't need to create a custom map everytime to use the slope overlay.
Thanks!
Quote from: Tronpo on January 29, 2024, 10:44:10 AM
Hello orux!!
I see that in the last two betas you have removed the buttons to add layers, draw layers, delete layers that were previously in the layer settings dropdown.
At first I didn't think much of it, but then I realized that I had replaced those 3 buttons on my keypad with the layer adjustment button.
Which gave me flexibility. I know that those features can be accessed in a variety of ways.
I don't know how this influences other users, I don't particularly Bother buttons.
I absolutely agree with Tronpo. In my opinion the buttons in the layer settings are a great way to add easy access to functions while saving space at the same time.
Thanks for adding the slope and relief map overlays, looks great!.
There does seem to be some transparency issues with the vtm map viewer, but looks fine in the standard viewer.
On my phone with mapsforge maps (OAM) news slope and relief map overlays do not work with standard view (theme Elevate),
but only with VTM viewer and its theme
Quote from: ut on February 09, 2024, 11:17:21 AM
On my phone with mapsforge maps (OAM) news slope and relief map overlays do not work with standard view (theme Elevate),
but only with VTM viewer and its theme
It works for me with both viewers, on the online ones as well
But I note that it's best to choose viewer and map, before loading the layer, to avoid conflicts with the cache
When you switch viewers with the layer loaded, the cache is different.
It's my opinion
For the use of these overlays, would it be possible for the user to configure the transparency/opacity in some way beforehand?
For example, in dem-based maps configuration.
I don't know if it's technically Possible .
And I don't see the transparency currently established by default as inadequate.
PS: thanks for returning the buttons to the drop-down in layer settings
A transparency control like the one you give us with the mapbox subscription would be the perfect one, for these overlays.
https://youtube.com/shorts/0YEQbQ33yRw?si=gNrnSMr7ehLZurOH
Good morning Orux!!
1-In the track editor, when we execute the action of "split into segment" it would be optimal to be able to edit the created segment, at least give it a name, if it were possible to access the properties , just as we have when we create a waypoint.
2 -For the "Layer Adjustments" or "Path Adjustment" drop-down menus
An access to the segment information would be very useful, a brief summary so as not to overload the screen with information, I think it would be very good.
Best regards!!
Quote from: kkolesar on January 26, 2024, 09:54:52 AM
minor thing, but please make the color of steeper slopes more different (>20% should be black)
Perfect solution in 10.5.7 version.
Thank you.
Hello Orux,
among the "other minor changes" in beta 7 I found out that the "straight lines" option in the route planner ads intermediate points and thus fits the route to the landscapes surface. This is really great and makes route planning with longer off road sections really comfortable! Thanks a lot Orux.
When planning routes two really important parameters (at least for me) are the distance and the elevation gain. When you start the route planner these items are hidden by default and when you show them you lose a lot of the map with the sliders for highway/surface and graph. Maybe you could think about showing the route parameters by default and place the sliders above them (hidden by default).
Maybe you also could take a look at the elevation gain and loss calculation. When you plan a round trip with the route planner there are big differences in gain and loss which should be zero (or at least close to zero because of rounding errors). I tried it with some routes with a length of about 10 - 12 km an an elevation gain of 1000-1200 m which led to differences between 90 to nearly 200 m depending on the terrain. Even after an altitude correction with Sonny's DEM files the differences were huge. But when i joined the segments everything was ok.
Best regards
Martin
Quote from: orux on January 10, 2024, 09:24:05 AM
Hello!
We start a new series of betas, with interesting changes:
10.5.3beta1:
--new route planner, with more data and options during planning
--new layer manager
--changes in the interface, icons,...
10.5.3beta2:
--tracks/waypoints in two columns in landscape
--minor changes
--bug corrections
10.5.3beta3:
--minor changes
10.5.3beta4:
--new 'tweak routes' and 'tweak track' options, to tweak fine grained the visibility of all the routes shown in the mapviewer and access their properties and different tools.
--minor changes
10.5.3beta5:
--minor changes
10.5.3beta6:
--minor changes
10.5.3beta7:
--added new map overlays (slopes and relief)
--added an option to modify maximum slope value when painting the route with slopes (settings->user interface->Tracks/lines,...->Colored paths with slope)
--other minor changes
10.5.3beta8:
--minor changes
https://oruxmaps.org/OruxMaps10.5.3beta8.apk (https://oruxmaps.org/OruxMaps10.5.3beta8.apk)
orux
Hi orux, in beta 8
Track editor > free selection does not work.
Saludos
Quote from: Lenz on February 19, 2024, 04:13:10 PM
Hello Orux,
among the "other minor changes" in beta 7 I found out that the "straight lines" option in the route planner ads intermediate points and thus fits the route to the landscapes surface. This is really great and makes route planning with longer off road sections really comfortable! Thanks a lot Orux.
When planning routes two really important parameters (at least for me) are the distance and the elevation gain. When you start the route planner these items are hidden by default and when you show them you lose a lot of the map with the sliders for highway/surface and graph. Maybe you could think about showing the route parameters by default and place the sliders above them (hidden by default).
Maybe you also could take a look at the elevation gain and loss calculation. When you plan a round trip with the route planner there are big differences in gain and loss which should be zero (or at least close to zero because of rounding errors). I tried it with some routes with a length of about 10 - 12 km an an elevation gain of 1000-1200 m which led to differences between 90 to nearly 200 m depending on the terrain. Even after an altitude correction with Sonny's DEM files the differences were huge. But when i joined the segments everything was ok.
Best regards
Martin
Totally agree, to your reference on the top bar.
I also add that it would be very interesting to be able to relate the altitude graph to the route, let me explain:
By clicking on the altitude graph a specific point, it is reflected in some way on the track that is being planned.
I've also noticed the differences you mention in the unevenness between a track with the segments and the same one with the segments joined
In beta8 when I go to edit a saved route I try to use free selection mode to select areas I want to delete but it says nothing selected, I think it's a bug :)
Quote from: abdullahosm on January 30, 2024, 07:31:00 AM
There is a slight problem in the way the help displays the route plan, and this may be due to the language orientation. A video of the difference between these screens when the application language is in Arabic/English:
https://www.youtube.com/watch?v=v-t7q9ygLgc
https://www.youtube.com/watch?v=-ru3Kgljzqc
Thank you, I tried the new version and now it works correctly. I have a suggestion to make the track export method the same as the waypoint export method (so that it shows a list of other applications to share the file instead of going to the file manually via the file manager):
https://www.youtube.com/watch?v=MpYBahRfZrg
Quote from: abdullahosm on February 24, 2024, 09:52:59 AM
Thank you, I tried the new version and now it works correctly. I have a suggestion to make the track export method the same as the waypoint export method (so that it shows a list of other applications to share the file instead of going to the file manually via the file manager):
https://www.youtube.com/watch?v=MpYBahRfZrg
Hello, this is now possible, instead of exporting, within the track properties use the share option.
https://youtube.com/shorts/92OE1CzISGE?si=0hkWLAAiDcSqNGU6
Hello orux!! It would be interesting to have the option of an automatic switch between night mode and day mode, using the phone's ambient light sensor.
For example, when we go through a tunnel
Thank you
Quote from: Tronpo on February 24, 2024, 03:28:39 PM
Hello, this is now possible, instead of exporting, within the track properties use the share option.
https://youtube.com/shorts/92OE1CzISGE?si=0hkWLAAiDcSqNGU6
Thank you so much, I didn't know this was possible any other way!
Hello orux!!
In view of improving the following route function:
Is it possible that when we deviate from the route, a line will automatically be displayed from our position to the nearest point of the route with distance information?
In walking activities it is easy to use tools to do this, but for example in cycling it is more complicated...
If that "away from route" line is kept (updated) until we get back on the road again that would be fantastic
Here's a visual example to make the concept easier.
Quote from: Tronpo on February 29, 2024, 08:54:24 AM
Hello orux!!
In view of improving the following route function:
Is it possible that when we deviate from the route, a line will automatically be displayed from our position to the nearest point of the route with distance information?
In walking activities it is easy to use tools to do this, but for example in cycling it is more complicated...
If that "away from route" line is kept (updated) until we get back on the road again that would be fantastic
Here's a visual example to make the concept easier.
Yes, i can also say, that this would be a great function!
This feature works already very good with the iGPSport IGS630 Bike Navi.
If you leave the track, there is a line displayed, which shows the direction to the track.
It is a good and simple alternative for rerouting.
The second thing is to automatically show an arrow before turn-left or turn-right.
For example turn left in 100 meters...50 meters. Maybe it's an idea to bind that in condition to the turn-angle of the track?
Quote from: dietherr on March 01, 2024, 08:49:11 AM
Yes, i can also say, that this would be a great function!
This feature works already very good with the iGPSport IGS630 Bike Navi.
If you leave the track, there is a line displayed, which shows the direction to the track.
It is a good and simple alternative for rerouting.
The second thing is to automatically show an arrow before turn-left or turn-right.
For example turn left in 100 meters...50 meters. Maybe it's an idea to bind that in condition to the turn-angle of the track?
Hello, if I haven't misunderstood you, the second option you mention is already done by Oruxmaps.
When you are following the route and this route has direction indicators, it gives you avusis de viz with the instructions. And if you have activated "show next waypoint" you can also see the direction icons with some more information, direction, arrival time.
Best regards
Hello Orux!!
It didn't take long for you to implement the automatic mode, thank you!!
I inform you of my two devices, in one there is no way for it to work :
Oppo A9 2020, other apps with similar functions work properly.
Thank you
Quote from: Tronpo on February 29, 2024, 08:54:24 AM
Hello orux!!
In view of improving the following route function:
Is it possible that when we deviate from the route, a line will automatically be displayed from our position to the nearest point of the route with distance information?
In walking activities it is easy to use tools to do this, but for example in cycling it is more complicated...
If that "away from route" line is kept (updated) until we get back on the road again that would be fantastic
Here's a visual example to make the concept easier.
In the next version we will talk about searching a new route, now that we have improved the route planner.
There are a series of doubts:
--find a new complete route to the destination or the fastest one that returns to the planned route?
--respect the calculation waypoints or not?
...
orux
Quote from: Tronpo on March 03, 2024, 07:17:49 AM
Hello Orux!!
It didn't take long for you to implement the automatic mode, thank you!!
I inform you of my two devices, in one there is no way for it to work :
Oppo A9 2020, other apps with similar functions work properly.
Thank you
What value do you use in settings > maps > night mode threshold? Use a high value.
If you cover the top of the phone with your hand, doesn't it change?
orux
Quote from: orux on March 03, 2024, 07:54:18 AM
What value do you use in settings > maps > night mode threshold? Use a high value.
If you cover the top of the phone with your hand, doesn't it change?
orux
Use several different values with none making the change.
I've also tried covering the phone.
Look for the phone manufacturer's information, if it has one, and where the sensor is.
Tops next to the camera.
But it doesn't do anything
Quote from: Tronpo on March 03, 2024, 10:06:24 AM
Use several different values with none making the change.
I've also tried covering the phone.
Look for the phone manufacturer's information, if it has one, and where the sensor is.
Tops next to the camera.
But it doesn't do anything
I've been checking, it may not be Oruxmaps' fault, the other apps with automatic night mode are linked to a time slot, if I cover the light sensor, the night mode is not activated either.
Luckily for me, the terminal I use for the bike works the automatic mode perfectly, perhaps it would be optimal to be able to add to this function the times of sunset and sunrise.
Thanks again for your work
Quote from: orux on March 03, 2024, 07:51:05 AM
In the next version we will talk about searching a new route, now that we have improved the route planner.
There are a series of doubts:
--find a new complete route to the destination or the fastest one that returns to the planned route?
--respect the calculation waypoints or not?
...
orux
Great, since you open the door to recalculate route, I will transfer your questions to a group of users to be able to give you a broader answer, and save you work by giving a result more to the taste of several users.
Great news!!
Hello Orux,
the names of waypoints (also the altitude of the highest/lowest point) belonging to a route are displayed incorrectly in beta 10. Waypoints of a track are shown correctly.
Quote from: Lenz on March 06, 2024, 05:12:44 PM
Hello Orux,
the names of waypoints (also the altitude of the highest/lowest point) belonging to a route are displayed incorrectly in beta 10. Waypoints of a track are shown correctly.
I confirm this, and add, the existing waypoints in the database also show their wrong name (colors) when loaded on the map.
When a new waypoint is created, it displays correctly when adding to the current track
Incorrectly when adding to the active route.
Hello orux!!
Trying automatic night mode following the route, in one of the light changes (streetlight), "the map is no longer visible"
Openandromaps Map
VTM Viewer
Tema vtm OruxGP.
To make the map visible again:
Turn off Auto Night Mode
Restart app
Hello!
beta updated...
orux
Quote from: orux on March 07, 2024, 03:49:39 PM
Hello!
beta updated...
orux
Error with waypoint name colors fixed 👍.
I haven't been able to test the Auto Night Mode theme 😞.
Doubts about the configuration of the threshold of the automatic night mode, the higher the value, the more "amount" of light or exposure time to it is needed to enter or exit the night mode, correct?
Have a nice weekend
Quote from: Tronpo on March 08, 2024, 10:12:02 AM
Error with waypoint name colors fixed 👍.
I haven't been able to test the Auto Night Mode theme 😞.
Doubts about the configuration of the threshold of the automatic night mode, the higher the value, the more "amount" of light or exposure time to it is needed to enter or exit the night mode, correct?
Have a nice weekend
The theshold are the lumens (lux) used for the transition from one state to the other. I think 15 > 20 is the right value...
It depends strongly with the device sensor, but the approximate values are:
https://en.wikipedia.org/wiki/Lux (https://en.wikipedia.org/wiki/Lux)
0.0001 | Moonless, overcast night sky |
0.002 | Moonless clear night sky with |
0.05–0.3 | Full moon on a clear night |
3.4 | Dark limit of civil twilight under a clear sky |
20–50 | Public areas with dark surroundings |
50 | Family living room lights |
80 | Office building hallway/toilet lighting |
100 | Very dark overcast day |
Quote from: orux on March 08, 2024, 04:18:01 PM
The theshold are the lumens (lux) used for the transition from one state to the other. I think 15 > 20 is the right value...
It depends strongly with the device sensor, but the approximate values are:
https://en.wikipedia.org/wiki/Lux (https://en.wikipedia.org/wiki/Lux)
0.0001 | Moonless, overcast night sky |
0.002 | Moonless clear night sky with |
0.05–0.3 | Full moon on a clear night |
3.4 | Dark limit of civil twilight under a clear sky |
20–50 | Public areas with dark surroundings |
50 | Family living room lights |
80 | Office building hallway/toilet lighting |
100 | Very dark overcast day |
Thank you!! Between 15 and 20 I found the best fit for my use.
DEM-based maps are wonderful. Especially using them as overlays.
Please make it possible to change the colours in the slope-map with tapping on colour in the slope-legend.
(there exist several standards)
Thank you, notbru
Quote from: orux on March 07, 2024, 03:49:39 PM
Hello!
beta updated...
orux
In today's beta 11 test the map remains throughout the journey, the bug seems to be fixed.
Auto Night Mode +vtm
Quote from: ut on February 09, 2024, 11:17:21 AM
On my phone with mapsforge maps (OAM) news slope and relief map overlays do not work with standard view (theme Elevate),
but only with VTM viewer and its theme
I discovered that using :
Global settings - Maps - Mapsforce settings - Apply hill shadows causes slope and relief map overlays do not work.
Unflagging this option the overlays work perfectly with Mapsforge and Elevate. Furthermore using overlays option - show/hide shadows I find a faster rendering than the the one obtained with the setting indicated above.
Perhaps the entry
Global settings - Maps - Mapsforce settings - Apply hill shadows could be
eliminated as it is useless and potentially blocking the new overlays
Quote from: ut on March 11, 2024, 07:34:22 PM
I discovered that using : Global settings - Maps - Mapsforce settings - Apply hill shadows causes slope and relief map overlays do not work.
Unflagging this option the overlays work perfectly with Mapsforge and Elevate. Furthermore using overlays option - show/hide shadows I find a faster rendering than the the one obtained with the setting indicated above.
Perhaps the entry Global settings - Maps - Mapsforce settings - Apply hill shadows could be eliminated as it is useless and potentially blocking the new overlays
Hello!! Indeed, the mapsforge shading, which has always "dominated" the general shading, seems that this has been extended by "overriding" the rest of the layers based on DEM (relief, slopes). In my opinion the elimination of the mapsforge shading would be a "loss", since this shading has the peculiarity of being shown in specific layers of the mapsforge map (defined by the creator of the mapsforge theme) such as in some cases it is above the terrain and below of roads, paths, labels, etc. Unlike the general shading that shows on top of everything. But I would like a notice in the interface informing about it, for example it would have saved me some confusion. Greetings
Waypoints in beta11 version are always mysteriously missing.
Quote from: leo on March 12, 2024, 12:52:43 PM
Waypoints in beta11 version are always mysteriously missing.
Hello, won't you have hide waypoint enabled?
I don't know where the hidden button is? There is nothing on the waypoint list
Can you add a feature? Create a map along the track
Quote from: leo on March 13, 2024, 03:04:11 AM
I don't know where the hidden button is? There is nothing on the waypoint list
Do you have this icon in the map item information bar?
Quote from: leo on March 13, 2024, 03:47:35 AM
Can you add a feature? Create a map along the track
Hello, you mean to download an off-line map, based on the area of a route?
Once you're done, you can put a button on the keypad, or tap on the on-screen route, a menu opens, and there's a choice.
Quote from: Tronpo on March 13, 2024, 05:17:59 AM
Do you have this icon in the map item information bar?
No,I do not have this icon
Quote from: Tronpo on March 13, 2024, 05:23:39 AM
Hello, you mean to download an off-line map, based on the area of a route?
Once you're done, you can put a button on the keypad, or tap on the on-screen route, a menu opens, and there's a choice.
Like locus?
Quote from: notbru on March 10, 2024, 12:15:44 PM
DEM-based maps are wonderful. Especially using them as overlays.
Please make it possible to change the colours in the slope-map with tapping on colour in the slope-legend.
(there exist several standards)
Thank you, notbru
AND:
Please divide range 35°-45° into two ranges with 5°: 35°-40° and 40°-45°
(all other ranges have already 5°)
Quote from: leo on March 13, 2024, 09:15:43 AM
Like locus?
Not so tight to the line of the route, orux makes a 4-sided polygon that frames the route.
Your referral is more efficient, it would be an improvement. 👍
Quote from: Tronpo on March 12, 2024, 06:36:46 AM
Hello!! Indeed, the mapsforge shading, which has always "dominated" the general shading, seems that this has been extended by "overriding" the rest of the layers based on DEM (relief, slopes). In my opinion the elimination of the mapsforge shading would be a "loss", since this shading has the peculiarity of being shown in specific layers of the mapsforge map (defined by the creator of the mapsforge theme) such as in some cases it is above the terrain and below of roads, paths, labels, etc. Unlike the general shading that shows on top of everything. But I would like a notice in the interface informing about it, for example it would have saved me some confusion. Greetings
Estoy totalmente de acuerdo en que Mapsforge shading NO debe desaparecer .
En los temas Mapsforge, determinadas capas, como el terreno, son semitransparentes, mientras que senderos, caminos, carreteras, etc son opacas por lo que destacan siempre del fondo, cosa que el sombreado general no tiene en cuenta.
Por ello más bien pienso que el shading general debería considerar las capas de cada mapa en aquellos tipos de mapa en que esto sea posible ya que el "merge" utilizado del mapa con los archivos dem lo convierte en inservible cuando se utilizan archivos
hdr+dem, especialmente si son muy detallados, pues hace que prácticamente no sean visibles los senderos en las zonas de sombra.
Desgraciadamente, el sombreado Mapsforge tiene un problema: sólo funciona con archivos
hgtA propósito de esto tuve una conversación con Tobias (creador de los temas Elevate y Elements) en la que me sugirió generar un Shadows.map y combinarlo con el mapa Mapsforge (OAM), obviamente editando elementos y capas del tema (básicamente he trasladado elementos a otras capas y eliminado el fondo por no poder mantener la semi-transparencia).
La idea es buena y funciona pero tiene un pero que no comprendo: Shadows.map sólo funciona hasta el zoom 16 cuando se combina con el mapa OAM, independientemente de que se indique un zoom más alto al generarlo y también al combinarlo, sorprendente si se tiene en cuenta que funciona perfectamente si está solo.
Cabría destacar que Oruxmaps es la única aplicación que permite usar sombreados detallados (
hdr+dem) y es una pena que no sea práctico utilizarlos por el motivo expuesto.
Sería muy de agradecer que
orux revisara este comportamiento.
10.5.3beta7:
--added new map overlays (slopes and relief)
--added an option to modify maximum slope value when painting the route with slopes (settings->user interface->Tracks/lines,...->Colored paths with slope)
Hi to all,
there is a legend of the slopes/relief/aspect overlays somewhere?
If not, it might be useful to have it (perhaps together with the slope and network legend, in settings->user interface->Tracks/lines,...-)
Quote from: ut on March 20, 2024, 12:04:16 PM
10.5.3beta7:
--added new map overlays (slopes and relief)
--added an option to modify maximum slope value when painting the route with slopes (settings->user interface->Tracks/lines,...->Colored paths with slope)
Hi to all,
there is a legend of the slopes/relief/aspect overlays somewhere?
If not, it might be useful to have it (perhaps together with the slope and network legend, in settings->user interface->Tracks/lines,...-)
Hello, in the last betas there is already the legend, in the side menu next to the layers.
Quote from: Tronpo on March 20, 2024, 04:59:31 PM
Hello, in the last betas there is already the legend, in the side menu next to the layers.
On dem-based maps, you also have the reference for the legend
Quote from: Tronpo on March 20, 2024, 05:30:31 PM
On dem-based maps, you also have the reference for the legend
thanks Trompo, you are absolutely right. I had searched for a long time.. but not in the right place :'(
Quote from: notbru on March 13, 2024, 03:27:08 PM
AND:
Please divide range 35°-45° into two ranges with 5°: 35°-40° and 40°-45°
(all other ranges have already 5°)
I would prefer colours and ranges (classes) like this (similar to swisstopo.ch (snowsport) or openslopemap.org):
Regards
Buenas tardes:
Tengo un Huawei Y7 2019,y he instalado esta Versión Beta 10.5.15 y he estado probando los controles por voz.
Van todos bien, pero cuando la pantalla del telefóno entra en reposo y esta grabando un track en segundo plano; cuando vuelvo a la aplicación e intento utilizar los controles, (tanto con los botones de volumen del teléfono, como el botón especifico de comando de voz colocado en una de las barras laterales de la app), ya no deja utilizarlos. Lo que hace la aplicación, al pulsarlos, es irse a la pantalla principal del telefóno y automaticamente irse otra vez a la aplicación, entrando en ese bucle cada vez que se pulsan los botones de volumen y el de la barra lateral. Tengo que irme a la pantalla principal del móvil con el botón de "Android" por ejemplo abrir la app de nuevo y ahora sí te deja de nuevo utilizar los controles por voz.
Quote from: IBERO on March 28, 2024, 07:59:02 PM
Buenas tardes:
Tengo un Huawei Y7 2019,y he instalado esta Versión Beta 10.5.15 y he estado probando los controles por voz.
Van todos bien, pero cuando la pantalla del telefóno entra en reposo y esta grabando un track en segundo plano; cuando vuelvo a la aplicación e intento utilizar los controles, (tanto con los botones de volumen del teléfono, como el botón especifico de comando de voz colocado en una de las barras laterales de la app), ya no deja utilizarlos. Lo que hace la aplicación, al pulsarlos, es irse a la pantalla principal del telefóno y automaticamente irse otra vez a la aplicación, entrando en ese bucle cada vez que se pulsan los botones de volumen y el de la barra lateral. Tengo que irme a la pantalla principal del móvil con el botón de "Android" por ejemplo abrir la app de nuevo y ahora sí te deja de nuevo utilizar los controles por voz.
Ocurre lo mismo con Oppo A9 2020, parece que la app no es capaz de desbloquear el reposo del teléfono (teniendo las configuraciónes para ello activadas)
Hay que ir al escritorio y abrir nuevamente la app
Saludos
Me está ocurriendo lo mismo en un OPPO A18. La he instalado y después de volver de la pantalla de reposo, ya no se pueden utilizar los controles de voz, ni con los botones de volumen, ni con el botón especifico en la barra lateral, como comenta Tronpo, hay que ir al escritorio y abrir nuevamente la app.
Saludos,
Quote from: IBERO on March 28, 2024, 07:59:02 PM
Buenas tardes:
Tengo un Huawei Y7 2019,y he instalado esta Versión Beta 10.5.15 y he estado probando los controles por voz.
Van todos bien, pero cuando la pantalla del telefóno entra en reposo y esta grabando un track en segundo plano; cuando vuelvo a la aplicación e intento utilizar los controles, (tanto con los botones de volumen del teléfono, como el botón especifico de comando de voz colocado en una de las barras laterales de la app), ya no deja utilizarlos. Lo que hace la aplicación, al pulsarlos, es irse a la pantalla principal del telefóno y automaticamente irse otra vez a la aplicación, entrando en ese bucle cada vez que se pulsan los botones de volumen y el de la barra lateral. Tengo que irme a la pantalla principal del móvil con el botón de "Android" por ejemplo abrir la app de nuevo y ahora sí te deja de nuevo utilizar los controles por voz.
Gracias!
Debe ser un problema antiguo. No se puede iniciar la actividad externa con el bloqueo de pantalla activo.
No veo otra que implementar mi propia pantalla de reconocimiento.
A ver si así funciona (añadido en beta16)
orux
Quote from: orux on March 31, 2024, 05:04:53 PM
Gracias!
Debe ser un problema antiguo. No se puede iniciar la actividad externa con el bloqueo de pantalla activo.
No veo otra que implementar mi propia pantalla de reconocimiento.
A ver si así funciona (añadido en beta16)
orux
Hola, acabo de probar la beta 16, hay que hacer algún paso extra, para el reconocimiento?
Ahora no se inicia el reconocimiento, en mi caso lo hacía Google (oppo A9 2020)
https://youtube.com/shorts/jWRzR5BEF7A?si=L4aMCnrKQISxCFUd
Ni con teclas de volumen ni botón
Saludos!!
Quote from: Tronpo on March 31, 2024, 06:24:50 PM
Hola, acabo de probar la beta 16, hay que hacer algún paso extra, para el reconocimiento?
Ahora no se inicia el reconocimiento, en mi caso lo hacía Google (oppo A9 2020)
https://youtube.com/shorts/jWRzR5BEF7A?si=L4aMCnrKQISxCFUd (https://youtube.com/shorts/jWRzR5BEF7A?si=L4aMCnrKQISxCFUd)
Ni con teclas de volumen ni botón
Saludos!!
Hmmm, quizás se me ha olvidado pedir el permiso de usar el micrófono. Mira si no lo tienes concedido en los permisos de la app.
Ahora es necesario para esta función, al no usar la actividad de Google.
orux
Quote from: orux on April 01, 2024, 07:06:06 AM
Hmmm, quizás se me ha olvidado pedir el permiso de usar el micrófono. Mira si no lo tienes concedido en los permisos de la app.
Ahora es necesario para esta función, al no usar la actividad de Google.
orux
Comprobado, aun dando el permiso de microfono en Android, ni funciona.
Buenos días:
A ver si alguien puede ayudarme, por favor:
He instalado esta última versión Beta 16 en un Huawei y6 2018 y he estado probando de nuevo los controles por voz:
Cuando tengo el wifi o los datos móviles y está conectado a una red, los controles por voz funcionan perfectamente. Pero cuando los desconecto, tanto el wifi, como los datos móviles (situación que puede ocurrir en la montaña o en el campo, donde no exista ninguna cobertura), me reconoce todos los comandos, menos el de "nuevo waypoint" (el de "editar waypoint" no lo puedo usar, por que no me lo crea). Cuando le indico "nuevo waypoint", me reconoce la palabra nuevo, pero la de "waypoint" no; me sale cualquier otra palabra que no se le parece en nada. Es como si en el idioma offline en español que utilizara, no tuviera la palabra "waypoint".
En la versión anterior a esta, es decir al Beta 15, que utilizaba los servicios de voz de Google, me pasaba exactamente igual: funcionaban todos, menos el de "nuevo waypoint", cuando no tenía cobertura ninguna de red.
Un saludo,
Es curioso, he hecho una consulta en el diccionario de la RAE y la palabra "waypoint", no esta en el diccionario.
https://dle.rae.es/waypoint?m=form.
Entonces, ¿Por qué la reconoce cuando está conectado el móvil a la red y cuando no lo está no la reconoce?.
??? ???
Quote from: IBERO on April 01, 2024, 09:48:22 AM
Buenos días:
A ver si alguien puede ayudarme, por favor:
He instalado esta última versión Beta 16 en un Huawei y6 2018 y he estado probando de nuevo los controles por voz:
Cuando tengo el wifi o los datos móviles y está conectado a una red, los controles por voz funcionan perfectamente. Pero cuando los desconecto, tanto el wifi, como los datos móviles (situación que puede ocurrir en la montaña o en el campo, donde no exista ninguna cobertura), me reconoce todos los comandos, menos el de "nuevo waypoint" (el de "editar waypoint" no lo puedo usar, por que no me lo crea). Cuando le indico "nuevo waypoint", me reconoce la palabra nuevo, pero la de "waypoint" no; me sale cualquier otra palabra que no se le parece en nada. Es como si en el idioma offline en español que utilizara, no tuviera la palabra "waypoint".
En la versión anterior a esta, es decir al Beta 15, que utilizaba los servicios de voz de Google, me pasaba exactamente igual: funcionaban todos, menos el de "nuevo waypoint", cuando no tenía cobertura ninguna de red.
Un saludo,
Te da paso la beta 16 para usar los comandos de voz? A mi no, pulso los botones de volumen o el botón de la barra lateral y no hace nada.
Haber la siguiente
Tronpo, a mí si me da paso para usar los comandos de voz. Un saludo.
Quote from: IBERO on April 01, 2024, 11:21:49 AM
Es curioso, he hecho una consulta en el diccionario de la RAE y la palabra "waypoint", no esta en el diccionario.
https://dle.rae.es/waypoint?m=form (https://dle.rae.es/waypoint?m=form).
Entonces, ¿Por qué la reconoce cuando está conectado el móvil a la red y cuando no lo está no la reconoce?.
??? ???
En ambas versiones sigue usando los servicios de Google, que a su vez son servicios online, que probablemente requieran consultar cosas en Internet para dar resultados correctos.
orux
Quote from: Tronpo on April 01, 2024, 12:50:37 PM
Te da paso la beta 16 para usar los comandos de voz? A mi no, pulso los botones de volumen o el botón de la barra lateral y no hace nada.
Haber la siguiente
Publicada una nueva beta, que pide permiso si no lo tiene. Si no se da, intenta con la forma antigua.
orux
Quote from: orux on April 02, 2024, 07:12:51 AM
Publicada una nueva beta, que pide permiso si no lo tiene. Si no se da, intenta con la forma antigua.
orux
Hola orux!!
He realizado varias pruebas, sin el permiso funciona bien el método antiguo.
Dando el permiso (desde Android o desde la ventana emergente) el reconocimiento de la app ni me funciona.
He probado con
La memoria privada y con la memoria raíz por si tuviera algo que ver, nada mismo resultado.
Te muestro un video resumen.
https://youtube.com/shorts/F3i5KJrPlw4?si=QlG1DDTKIv6L_67N
Hi orux,
Just throwing this idea out there since im not sure if this would be possible to implement, but I was thinking about a feature to calculate / generate a route based off the slope map data, ie for backcountry skiing for going uphill generate a route in a certain radius from a start point and end point based on the easiest / minimal slope to avoid the steeper terrain, or for a downhill run find the steepest non cliffy (perhaps configurable) slope and make a route for that.
Every time I go backcountry ski I always think how useful that would be :).
Quote from: orux on April 02, 2024, 07:12:09 AM
En ambas versiones sigue usando los servicios de Google, que a su vez son servicios online, que probablemente requieran consultar cosas en Internet para dar resultados correctos.
orux
Buenos días Orux:
¿Y no habría alguna manera de sacar una versión, que para solucionar este problema de cuando no hay cobertura de red (e incluso con ella) , se pudiera utilizar otra palabra en castellano, que figure en el idioma-diccionario, para que la reconociera la aplicación y creara un waypoint.? No sé, a modo de ejemplo "Nuevo punto", "Nuevo sitio" etc. etc.
Gracias y un saludo
Quote from: IBERO on April 02, 2024, 11:46:53 AM
Buenos días Orux:
¿Y no habría alguna manera de sacar una versión, que para solucionar este problema de cuando no hay cobertura de red (e incluso con ella) , se pudiera utilizar otra palabra en castellano, que figure en el idioma-diccionario, para que la reconociera la aplicación y creara un waypoint.? No sé, a modo de ejemplo "Nuevo punto", "Nuevo sitio" etc. etc.
Gracias y un saludo
No estaría nada mal!! Incluso con señal de red, a Google le cuesta mucho "pillar" mi waypoint con acento sevillano :)
Quote from: Tronpo on April 02, 2024, 01:38:26 PM
No estaría nada mal!! Incluso con señal de red, a Google le cuesta mucho "pillar" mi waypoint con acento sevillano :)
Entonces, si que le haría un monumento a Orux: ;D ;D
Quote from: IBERO on April 02, 2024, 11:46:53 AM
Buenos días Orux:
¿Y no habría alguna manera de sacar una versión, que para solucionar este problema de cuando no hay cobertura de red (e incluso con ella) , se pudiera utilizar otra palabra en castellano, que figure en el idioma-diccionario, para que la reconociera la aplicación y creara un waypoint.? No sé, a modo de ejemplo "Nuevo punto", "Nuevo sitio" etc. etc.
Gracias y un saludo
Buenos días Orux:
Por favor, ¿cabría la posibilidad de esto?.
Gracias.
Quote from: Tronpo on April 02, 2024, 09:22:37 AM
Hola orux!!
He realizado varias pruebas, sin el permiso funciona bien el método antiguo.
Dando el permiso (desde Android o desde la ventana emergente) el reconocimiento de la app ni me funciona.
He probado con
La memoria privada y con la memoria raíz por si tuviera algo que ver, nada mismo resultado.
Te muestro un video resumen.
https://youtube.com/shorts/F3i5KJrPlw4?si=QlG1DDTKIv6L_67N (https://youtube.com/shorts/F3i5KJrPlw4?si=QlG1DDTKIv6L_67N)
A ver si a la tercera va la vencida...
Prueba ahora a ver si arranca, con la beta18
orux
Quote from: IBERO on April 02, 2024, 01:52:17 PM
Entonces, si que le haría un monumento a Orux: ;D ;D
Ya me dirás dónde lo instalas ;D
He añadido en castellano/gallego/catalán las tres opciones 'nuevo waypoint/borrar waypoint/editar waypoint' con 'nuevo lugar/borrar lugar/editar lugar'
Con 'punto' no funcionaba, escribe un '.'
A ver si así va offline,
orux
Quote from: orux on April 04, 2024, 07:54:31 AM
Ya me dirás dónde lo instalas ;D
He añadido en castellano/gallego/catalán las tres opciones 'nuevo waypoint/borrar waypoint/editar waypoint' con 'nuevo lugar/borrar lugar/editar lugar'
Con 'punto' no funcionaba, escribe un '.'
A ver si así va offline,
orux
Buenos días nuevamente Orux:
Acabo de instalar la nueva beta 18 y he salido a probarla. He quitado tanto el wifi, como los datos móviles, o sea sin red. Los resultados offline:
- Todo funciona perfectamente: todos los controles por voz van de lujo. Crea los "lugares", tanto por el nombre, como por el tipo etc.
Lo dicho: eres un p.t. máquina.
En cuánto tenga instalado el monumento, te mando el "lugar-waypoint", para que tengas las coordenadas. ;D ;D ;D
Quote from: orux on April 04, 2024, 07:54:31 AM
Ya me dirás dónde lo instalas ;D
He añadido en castellano/gallego/catalán las tres opciones 'nuevo waypoint/borrar waypoint/editar waypoint' con 'nuevo lugar/borrar lugar/editar lugar'
Con 'punto' no funcionaba, escribe un '.'
A ver si así va offline,
orux
😞😞No termina de entrar el reconocimiento de Orux
https://youtube.com/shorts/svFwECQ-C7k?si=KqynPcfj7pmLRYNw
Quote from: odin on April 02, 2024, 11:17:27 AM
Hi orux,
Just throwing this idea out there since im not sure if this would be possible to implement, but I was thinking about a feature to calculate / generate a route based off the slope map data, ie for backcountry skiing for going uphill generate a route in a certain radius from a start point and end point based on the easiest / minimal slope to avoid the steeper terrain, or for a downhill run find the steepest non cliffy (perhaps configurable) slope and make a route for that.
Every time I go backcountry ski I always think how useful that would be :) .
It is not very easy to implement. With roads we have a limited number of nodes to search for a path, but in the countryside there are infinite possibilities.
I also usually (rather used to) do mountain skiing. I was one of those who climbed as steep as possible. But there are those who like to make long diagonals. There are many possible paths between both options. A desirable slope would have to be set. Then there are geographical features that are not seen in the DEM files.
Complicated, although I'll give it a try...
orux
Quote from: Tronpo on April 04, 2024, 10:05:28 AM
😞😞No termina de entrar el reconocimiento de Orux
https://youtube.com/shorts/svFwECQ-C7k?si=KqynPcfj7pmLRYNw
Solucionado!! Borre todo he instalado desde cero. Ahora si funciona
Buenos días:
A modo de sugerencia de mejora, incluiría algunos iconos más de "lugar-waypoint", que se hecha en falta en algunas ocasiones, como rutas por el campo:
- Río.
- Cascada.
- Mirador.
- Árbol.
- Cima o cumbre.
- Lago.
- Monumento.
- Estatua.
- Roca.
- Hospital.
Etc.
Muchas gracias, y mil agradecimientos por esta increíble APP.
Hola también puedes personalizar o incluir tus propios iconos
Ver aquí (http://tronpoonpo.blogspot.com/2021/08/waypoints-personalizados.html)
Te dejo una página donde puedes descargarte paquetes de iconos completos por grupos, modificar colores etc gratis.
https://mapicons.mapsmarker.com/
Saludos
Quote from: Tronpo on April 10, 2024, 07:53:04 AMHola también puedes personalizar o incluir tus propios iconos
Ver aquí (http://tronpoonpo.blogspot.com/2021/08/waypoints-personalizados.html)
Te dejo una página donde puedes descargarte paquetes de iconos completos por grupos, modificar colores etc gratis.
https://mapicons.mapsmarker.com/
Saludos
Muchas gracias Tronpo, por tu estimada ayuda. Hay una gran cantidad de "lugar-waypoint". Tienes un magnifico blog, en el que se aprende mucho sobre esta APP.
Buenos días:
Tronpo u Orux, una cuestión:
¿Existe alguna manera, de que los "lugares-waypoints" "propios", los creados a través del gestor de Waypoints, se pudieran copiar de un móvil a otro (carpeta customwpts), y que se pudieran utilizar?.
Es decir, no solo que se copien las imágenes de un móvil a otro, si no que además sus nombres y que cuando abras la aplicación en el segundo móvil y te vayas a tus "lugares-waypoints" "propios" ya estén creados con sus nombres e imágenes asociadas.
Muchas gracias y un cordial saludo
Quote from: IBERO on April 12, 2024, 10:53:23 AMBuenos días:
Tronpo u Orux, una cuestión:
¿Existe alguna manera, de que los "lugares-waypoints" "propios", los creados a través del gestor de Waypoints, se pudieran copiar de un móvil a otro (carpeta customwpts), y que se pudieran utilizar?.
Es decir, no solo que se copien las imágenes de un móvil a otro, si no que además sus nombres y que cuando abras la aplicación en el segundo móvil y te vayas a tus "lugares-waypoints" "propios" ya estén creados con sus nombres e imágenes asociadas.
Muchas gracias y un cordial saludo
Los tipos personalizados se guardan en la carpeta oruxmaps/customwpts/ en el fichero customwpts.txt
Si llevas esos tipos (y los iconos) a otro teléfono, te llevarás los tipos.
En esa carpeta también están los tipos de Track personalizados, el fichero customtrktypes.txt
orux
Buenas!
Abierto nuevo hilo, con nueva beta:
https://oruxmaps.org/forum/index.php?topic=44507.0 (https://oruxmaps.org/forum/index.php?topic=44507.0)
orux