ANT+ power sensor

[joergjung]

Oruxmaps is my very much preferred app to track my bike activities. I now plan to use a power sensor in order to collect power data in addition to the ususal cadence and HR data. Is it possible to connect a powermeter (powertap in my case) to Oruxmaps via the ANT+ protocol?



Best regards,



Joerg

[orux]

Oruxmaps is my very much preferred app to track my bike activities. I now plan to use a power sensor in order to collect power data in addition to the ususal cadence and HR data. Is it possible to connect a powermeter (powertap in my case) to Oruxmaps via the ANT+ protocol?



Best regards,



Joerg

Hi, thanks;



that sensor is a bit complicated, I will try in the future,



orux

[joergjung]

Dear Orux,



thank you for the implementation of the power sensor. I tested it during my first ride this year and it seemed to work, i.e. the power data were displayed during my tour. However, I was not able to download the data from the Galaxy S5 which I used to collect the data. The gpx file only contained the usual location data, but no power data. What do I need to do to get the data into ecxel or golden cheetah?



Joerg

[fabrylama]

Hi Orux, in a few days I'm going to buy an ant+ power meter, I already did some testing and the power data are showed correctly, but without the rolling averages (3, 5, 10, 30 seconds window) data fields, as in the garmin units, it's almost impossible to use oruxmaps with a power meter because the power data in inherently too jumpy.

Thank you again for this amazing app :!:  and please consider adding these data fields. Thanks

[fabrylama]

up

[Uli]

I am interested to buy the spanish Rotor InPower 3D powersensor for my bike.

But I will buy only when the data can be shown on Oruxmaps.

Is there anyone who does know or can confirm that?

[orux]

Hi Orux, in a few days I'm going to buy an ant+ power meter, I already did some testing and the power data are showed correctly, but without the rolling averages (3, 5, 10, 30 seconds window) data fields, as in the garmin units, it's almost impossible to use oruxmaps with a power meter because the power data in inherently too jumpy.

Thank you again for this amazing app :!:  and please consider adding these data fields. Thanks

hello;





What about the accumulated values?



Please, could you tell us which fields are working fine,







orux

[cyclingfun]

Today I tried Stages Power Meter with Orux  and it works OK on my Xperia 3 Compact ( via ANT ) - i see on my dashboard values from Power Meter .



The problem is, as we can read here in post by  joergjoung from 03. April 2015 - gpx contain no Power Data.

We need TCX or better FIT file format.



Are there any plans to implements possibility to save track as Fit or Tcx?

[potifa]

+1 for this one. Displaying current power is just one side of the coin. I've also recently acquired a power meter and started to use it for indoor training. While it's still winter, soon this will change, and I'll still want to use power data for training analysis. Hence, it would be great if Oruxmaps could offer support for .fit files. I'd very much love to avoid to buy another device which for everything but power analysis would be completely redundant.

[orux]

+1 for this one. Displaying current power is just one side of the coin. I've also recently acquired a power meter and started to use it for indoor training. While it's still winter, soon this will change, and I'll still want to use power data for training analysis. Hence, it would be great if Oruxmaps could offer support for .fit files. I'd very much love to avoid to buy another device which for everything but power analysis would be completely redundant.

Hello,



last beta version adds support to export tracks in FIT, TCX and CSV formats; experimental, not all sensors data available.





orux

[cyclingfun]

I have installed  ( OruxMaps 7.0.6 beta) but can not find option to choose fit or tcx as saving format. ( What i found: ,,automatic creation gpx'')

Can you help me where in seetings is hidden  fit, tcx choice.

[potifa]

Sorry, only saw the reply now - three months later. Thank you very much for the hint.

[6745th@web.de]

Not inside settings.



Goto tracklist,  mark track and export.



https://uploads.tapatalk-cdn.com/20170329/7c66328bd6b3a4456a72f57c026830eb.jpg">



https://uploads.tapatalk-cdn.com/20170329/86e09e982e5764e5b38d37722d06c74f.jpg">

[cyclingfun]

Thanks a lot.



Unfortunatelly it looks like it is not working with my 4iii Power Meter. In 2 weeks i will try how it works with Stages Power Meter.



In tcx file  i see all details ( heart rate, cadence , speed ....but no Power)  and i see track on map corectly .Tcx exported to Strava -https://www.strava.com/activities/921191922">//https://www.strava.com/activities/921191922- coordinates , gps track Ok

In fit file  i seel all details (heart rate, cadence , speed ....but no Power) and i think there is a problem with coordinates - see another fit exported to Strava https://www.strava.com/activities/921194072">//https://www.strava.com/activities/921194072  



More test i will do on Saturday.

[cyclingfun]

Stages Power Meter  also not working



( in tcx or fit i see cadence from Power Meter but i don't see power values)



On screen during a ride i see power from both Stages and 4iii.



( I have tried in Orux Beta and in Orux Donate)