Title: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on January 17, 2014, 11:12:24 PM
Post by: eartrumpet on January 17, 2014, 11:12:24 PM
I developed Elevate for mountain hiking in the alps. At first it was based on the standard hike and cycle theme of Openandromaps, but has been completely revised since. I added additional variants by and by for other uses, by user requests.
It's been developed and tested with OruxMaps and Mapsforge 0.4.0. Locus uses its own mapsforge extension so complete functionality isn't always for sure.
Everything should be self-explanatory without a key, as far as it's possible with the possibilities of mapsforge. Therefore I based it on the presentation on paper maps and guideposts in German and Austrian areas.
Unified symbols are used which are the same as in Openstreetmap/Mapnik, as well as the colors of their captions. At higher zoom levels names of amenities and areas are shown. As many things which are relevant for hiking and travelling as possible are shown without coming too much to the front or eliminating one another - e.g. big symbols or captions.
Variations:
Key aspect is to have good overview for all features which are relevant for mountain hiking and perceptibility of paths and track, especially their difficulty and character (or if there isn't any information about that). As Elevate is the basis for the other variations characteristics like the display of landscape features are included in those.
As this is a cycling version instead of hiking routes cycling routes are shown strongly. The highly emphasized footways and paths of Elevate are slimmer and difficulty and visibility isn't marked.
Also mountain bike levels of difficulty are marked.
For sparsely populated/mapped areas, mostly backcountry usage.
All elements of Elevate and Elevelo (except mountain bike difficulty levels) are shown, hiking and cycling routes as well as the highly emphasized footways and paths in one map, as well as showing everything as soon as possible. Therefore the colored dots at low zoom levels aren't necessary.
In densely mapped areas this variation is not recommended, in those it is slow and unclear.
If cycling and hiking route are on one way the cycling route is rendered dashed above the hiking route so both are visible.
This is a light version which is especially useful in cities, for example for sightseeing or for everyday life.
Neither hiking nor cycling routes are shown. The highly emphasized footways and paths of Elvate are discreet and difficulty and visibility is not marked.
Additionally for better overview at lower zoom levels peaks and colored dots are missing. Therefore this variation is most suitable for finding names of localities.
Downloads in various sizes and map key here:
If you have any comments, questions, wishes... feel free to post here, this is why I created this thread.
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on January 17, 2014, 11:16:06 PM
Post by: eartrumpet on January 17, 2014, 11:16:06 PM
Most important is the support of Christian of Openandromaps which made it possible to share my theme on his project website, and has added tons of features which I and others wished for to his maps. Also I got great feedback and inspiration from lots of comments and emails and lots of testing and developing. All this lead to a new, (mostly) original theme which is now used by several other themes, some announced here.
Thanks a lot, I never imagined that. Also thanks to Orux for making such a great app!
As I haven't posted something about Elevate here since the start of the new forum, I use the recent big update of Openandromaps and Elevate as a reason to start a thread again.
Most important hiking features like trail_visibility, wilderness_hut, safety measures etc. are there now. I don't know any online OSM map which has that many details for hikers, and this one is offline and as a space saving mapsforge file.
So if anyone hasn't tried
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on February 01, 2014, 04:41:37 PM
Post by: eartrumpet on February 01, 2014, 04:41:37 PM
1.3.1 01/02/14
- improved pattern protected_area z16+, rendering of safety measures ways, wetland pattern, zoom-min for landcover, hike nodes, piste:downhill
- added name for graveyard/cemetery, .nomedia file, slight indicator for sac_scale T5/T6, earlier names for camp_site/caravan_site
- removed cycle networks at zoom 11-14 in Elegant
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on February 08, 2014, 03:57:56 PM
Post by: eartrumpet on February 08, 2014, 03:57:56 PM
As I developed Elevate at hdpi resolution (233dpi), a often mentioned point was that everything is too small on very high resolution smartphones with xhdpi (300dpi+) or even xxhdpi (450dpi+). I want to solve that problem with the new version, so now are two new options included - Elevate_L und Elevate_XL.
It was necessary to completely rework the symbols and patterns, so a lot has changed in the normal version too.
As I don't have access to xxhdpi smartphones I would really appreciate comments of owners of xxhdpi device, like Galaxy S4, HTC One, Nexus 5, LG G2, Sony XPeria Z... about Elevate_XL!
I am happy about any other kind of feedback as well.
PS. Thanks to dsvilko for the size conversion script!
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: Uli on February 08, 2014, 05:03:53 PM
Post by: Uli on February 08, 2014, 05:03:53 PM
But that can be convenient in certain surroundings.
Written with S4 Active on TapaTalk
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on February 08, 2014, 05:12:31 PM
Post by: eartrumpet on February 08, 2014, 05:12:31 PM
Quote from: "Uli"On my S4 Active Streetnames are a bit too big.
Thanks for your feedback.
Do you have any font size multiplicator set in Oruxmaps?
Is the symbol size OK?
Best regards,
Tobias
Title: Re: AW: Elevate - mountain hike theme for Oruxmaps and Opena
Post by: Uli on February 08, 2014, 08:30:18 PM
Post by: Uli on February 08, 2014, 08:30:18 PM
At least on my S4 Active the symbols have just the right size too.
Thank you.
Written with S4 Active on TapaTalk
Title: Re: AW: Elevate - mountain hike theme for Oruxmaps and Opena
Post by: eartrumpet on February 08, 2014, 11:01:33 PM
Post by: eartrumpet on February 08, 2014, 11:01:33 PM
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: Maki on February 10, 2014, 10:52:05 PM
Post by: Maki on February 10, 2014, 10:52:05 PM
Quick tip: you can use digital zoom to simulate a different device. It will look jagged, but size-wise you get a good idea about how it works.
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on February 11, 2014, 10:48:01 AM
Post by: eartrumpet on February 11, 2014, 10:48:01 AM
thanks for the tip, great idea! The dpi simulation of genymotion isn't working that great, so this works better.
Best regards,
Tobias
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on February 15, 2014, 10:02:05 AM
Post by: eartrumpet on February 15, 2014, 10:02:05 AM
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: Maki on February 16, 2014, 09:40:31 PM
Post by: Maki on February 16, 2014, 09:40:31 PM
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on February 16, 2014, 11:26:40 PM
Post by: eartrumpet on February 16, 2014, 11:26:40 PM
You're right, at the moment I'm using the rather delicate "Elegant" version of paths, which are good for city usuage in comparison to the massive "Elevate" version with emphasis on footways and paths. Maybe something inbetween would be right, I'll look into it.
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on February 17, 2014, 10:39:03 AM
Post by: eartrumpet on February 17, 2014, 10:39:03 AM
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on February 22, 2014, 12:43:36 PM
Post by: eartrumpet on February 22, 2014, 12:43:36 PM
All changes here:
The map key is also updated.
Many thanks to dsvilko for the size conversion script, that made this a lot easier!
All downloads can be found here:
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on March 09, 2014, 08:59:04 AM
Post by: eartrumpet on March 09, 2014, 08:59:04 AM
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on March 19, 2014, 08:38:43 PM
Post by: eartrumpet on March 19, 2014, 08:38:43 PM
Here are the downloads and the whole changelog:
2.1.0RC 19/03/14
- new variation: Elements with cycling & hiking routes and little zoom-mins - for sparsely populated/mapped areas
- added emergency phone, mini_roundabout, desert, vending=bicycle_tube, religion=buddhist/shinto/hindu, border_control, raceway, bus_guideway, helipad area
- improved contour lines, closed piste areas
- changed mtb routes to orange
- some clean-up & restructuring & zoom-min changes
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on March 22, 2014, 10:35:52 AM
Post by: eartrumpet on March 22, 2014, 10:35:52 AM
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on May 04, 2014, 10:38:42 AM
Post by: eartrumpet on May 04, 2014, 10:38:42 AM
- Elements: removed zoom-min for shelter caption, green overlay for protected areas
- fixed grave_yard caption
- added surface coloring to highways (except path, track, byway, bridlewy, motorway)
- adjusted some dy for Java map viewers
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on May 11, 2014, 11:09:29 AM
Post by: eartrumpet on May 11, 2014, 11:09:29 AM
2.1.2 11/05/14
- added zoom-min for huts, name for tourism=information without information details
- improved motorway_junction, aeroway symbols
- removed surface coloring for major highways
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on May 25, 2014, 04:04:28 PM
Post by: eartrumpet on May 25, 2014, 04:04:28 PM
Here are some test versions, feedback is very welcome:
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: Maki on May 26, 2014, 11:03:52 PM
Post by: Maki on May 26, 2014, 11:03:52 PM
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on May 27, 2014, 08:56:16 AM
Post by: eartrumpet on May 27, 2014, 08:56:16 AM
thanks for your feedback.
You're right, the lines for uphill are not ideal, but as several users wanted to have the original OAM MTB tags included seem to have been satisfied by it. I didn't give a different solution much thought - you have probably
As I have just looked at your colored dots I just got a different idea...
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on June 01, 2014, 10:57:20 PM
Post by: eartrumpet on June 01, 2014, 10:57:20 PM
2.2.0 01/06/14
- optimized rendering at zoom 12 and 13 for place names
- limited poi symbols to zoom 14 and larger and added low zoom markers (zoom 12+13) for important pois
- included MTB-scale in Elevelo (not in Elements because of sac_scale)
- added symbol for farmyard, archaeological_site, wayside_shrine, tundra
- removed green overlay for protected areas at lower zooms
- changed priority for camp_sites/caravan_sites, rendering for landfill, contour lines at lower zooms, rendering of surface
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on June 19, 2014, 09:55:41 AM
Post by: eartrumpet on June 19, 2014, 09:55:41 AM
2.2.1 19/06/14
- removed leisure=park from protected areas, wrong rendering of motorway_junction numbers at Zoom 19+
- added ways for towers, oneway=-1, ferry_terminal, defibrillator
- changed trail_visibility value combinations
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on August 05, 2014, 09:27:57 PM
Post by: eartrumpet on August 05, 2014, 09:27:57 PM
2.2.2 05/08/14
- changed file/folder names so that it's easier to guess the use of the theme (added hiking/cycling/city/backcountry)
- added sport=climbing, seperate symbol for emergency=phone, circles to hiking/cycling nodes
- made surface coloring more visible
- reduced generator:source to the more visible ones
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on September 03, 2014, 02:00:12 PM
Post by: eartrumpet on September 03, 2014, 02:00:12 PM
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: virgil77 on September 07, 2014, 09:55:29 AM
Post by: virgil77 on September 07, 2014, 09:55:29 AM
in my samsung note 2 doesn't work.I follow the istruction but i always see a black screen.i try whit elevate,e L and e XL.
any advice?
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on September 07, 2014, 10:22:22 AM
Post by: eartrumpet on September 07, 2014, 10:22:22 AM
It's always best to directly move the zip file into the mapstyles folder within android, and unzip it there completely. I use ES Explorer for that.
Just follow those instructions step by step:
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: virgil77 on September 07, 2014, 11:51:39 AM
Post by: virgil77 on September 07, 2014, 11:51:39 AM
The themes works great!
Tank you
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on September 17, 2014, 11:32:19 AM
Post by: eartrumpet on September 17, 2014, 11:32:19 AM
2.2.3 17/09/14
- added pattern for glacier, name for weir/lock, leaf_type, railway=abandoned/disused, aerialway=goods, symbol for drag_lift
- new rendering for wall, retaining_wall, dam, weir, dock, lock
- some changes for Elevelo (removed sled/nordic pistes, MTB scale perceptibility improvement, more contrast in route colors)
- simplified track intervals
- reduced generator:source to the more visible ones
- changed most nodes to any
- removed members-only huts from low zoom marker for alpine huts
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on October 29, 2014, 02:54:31 PM
Post by: eartrumpet on October 29, 2014, 02:54:31 PM
And here comes another small update:
2.2.4 29/10/14
- Elegant: removed low zoom markers and limited peaks to zoom 14+ for better overview
- add zoom-min for military areas/waterways/polylabels, captions for ditch/drain, tunnel for railway=abandoned
- changed city and town name sizes at lower zoom levels, rendering retaining_wall, zoom-min for barriers for Elegant and Elevate, rendering of park etc. captions, rendering railway=abandoned
- removed bridge for areas
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on November 13, 2014, 06:46:27 PM
Post by: eartrumpet on November 13, 2014, 06:46:27 PM
I tried to get the rendering as close as possible to how it is in the current version of Oruxmaps which is using mapsforge 0.3
As I don't have a device with 480dpi the XL themes are only tested in an emulator, so if anyone could give me feedback if they work as expected on real 480dpi devices would be great!
Here they are:
240dpi:
320dpi:
480dpi:
Title: Re: AW: Elevate - mountain hike theme for Oruxmaps and Opena
Post by: 6745th@web.de on November 13, 2014, 10:05:07 PM
Post by: 6745th@web.de on November 13, 2014, 10:05:07 PM
I made a short test with my galaxy s4.
Zoom level 14 with green forest, as expected
Zoom level 15 and forest becomes white.
Greetings,
Thomas
Title: Re: AW: Elevate - mountain hike theme for Oruxmaps and Opena
Post by: eartrumpet on November 13, 2014, 10:52:01 PM
Post by: eartrumpet on November 13, 2014, 10:52:01 PM
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: 6745th@web.de on November 14, 2014, 07:28:03 AM
Post by: 6745th@web.de on November 14, 2014, 07:28:03 AM
Still white. ZL15
Did you upload the changed theme?
Thomas
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on November 14, 2014, 09:11:52 AM
Post by: eartrumpet on November 14, 2014, 09:11:52 AM
I tested and uploaded everything, now it should work.
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: 6745th@web.de on November 14, 2014, 02:01:48 PM
Post by: 6745th@web.de on November 14, 2014, 02:01:48 PM
Danke.
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on November 18, 2014, 07:30:57 PM
Post by: eartrumpet on November 18, 2014, 07:30:57 PM
I updated the Elevate themes today.
The biggest news: there are now special versions for the new OruxMaps 6.0 version, which was published yesterday.
As it renders many details in different sizes because of the used mapsforge 0.4 version, the new OruxMaps themes are optimized for that. Also with OruxMaps 6.0 the themes (and maps) can now easily installed, just use your Android browser and press on "Install".
All changes:
2.3.0 18/11/14
- added themes optimized for OruxMaps 6
- optimized rendering for mapsforge 0.4+
- moved large patterns to lower zoom levels
- changed motorway_junction, peak rendering zoom 13 and lower, track casings
- added map border
Best regards,
Tobias
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: pilluli on November 18, 2014, 07:51:51 PM
Post by: pilluli on November 18, 2014, 07:51:51 PM
Do I need a specific XL version or just the link in the first post of this thread is fine?
Thanks.
EDIT: forget my question. I see now that this new version is pushed already to openandroidmaps so I can get all resolutions!!!
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: pilluli on November 18, 2014, 08:38:27 PM
Post by: pilluli on November 18, 2014, 08:38:27 PM
I noticed that some icons disappear when the zoom decreases. However I do not understand why some of them do before others.
For instance, in this example the drinking water icon disappears as the zoom is decreased before the restaurant icon:
Is there a way to change the priority of icons so they stay on the screen longer? I am more interested in some of them more than others!!
Regards,
Title: Re: Elevate - mountain hike theme for Oruxmaps and Openandro
Post by: eartrumpet on November 18, 2014, 08:52:38 PM
Post by: eartrumpet on November 18, 2014, 08:52:38 PM
Quote from: "pilluli"Hi Tobias,
I noticed that some icons disappear when the zoom decreases. However I do not understand why some of them do before others.
For instance, in this example the drinking water icon disappears as the zoom is decreased before the restaurant icon:
Is there a way to change the priority of icons so they stay on the screen longer? I am more interested in some of them more than others!!
Regards,
In this example it's just bad luck that the restaurant icon is shown and drinking water not.
It's a bit complicated:
Zoom level 16 in the new Oruxmaps version means real zoom level 15 in the map. At this level both icons can be visible, but in a crowded area only one will show if there is space. So the farther you decrease the zoom level, the less icons are visible. At the mapsforge version Oruxmaps uses there is no real priority management possible, you can only limit at which zoom levels icons are shown. So if you set zoom-min in the xml-file for restaurants to zoom-min="16" or larger, the restaurant symbol won't appear and can't eliminate the drinking water.
Best regards,
Tobias
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: pilluli on November 18, 2014, 09:17:21 PM
Post by: pilluli on November 18, 2014, 09:17:21 PM
Regards
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on December 20, 2014, 11:27:17 AM
Post by: eartrumpet on December 20, 2014, 11:27:17 AM
The biggest changes are new map appearance for buildings, place names, motorways and primary highways and state borders and new improved rendering of routes with a separate color for local hiking routes.
2.4.0 20/12/14
– new appearance – changed colors/rendering for: buildings/wall/retaining_wall/dam etc., motorways/primary highways/motorway junctions/highway refs, place names, admin borders, peak names, pattern for pedestrian roads/areas etc.
– enhanced routes: added seperate color for local hiking routes (yellow), better visibility of route refs, some fine-tuning
– added separate rendering for MTB-scale 5+6, water_well, ele for cave_entrance, inhabited landuses color for lower zooms
– optimized low zoom markers, major highway casings
– loosened dy value for OruxMaps so higher dpi themes can be used on lower dpi devices (e.g. 240dpi on 160dpi) and font-size a bit enlarged with OruxMaps setting
– limited paths/footway/steps/MTB-scale to zoom 13+
– removed POI areas with tunnel=yes
– combined all accompanying .txt-files
Downloads:
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on January 04, 2015, 11:47:28 AM
Post by: eartrumpet on January 04, 2015, 11:47:28 AM
It's a major update for
A second major change is the
In the
Those and more changes can be found as always in the changelog.
All downloads can be found as usual on the Elevate theme page:
To illustrate the changes in map appearance I attached some comparisons to Elevate 2.3:
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: 6745th@web.de on January 19, 2015, 08:39:04 PM
Post by: 6745th@web.de on January 19, 2015, 08:39:04 PM
I just update Orux to the last version.
Now it uses mf0.5
Some streets are looking a bit crazy now:
Elevate:
vs. OAM:
Greetings,
Thomas
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on January 20, 2015, 07:16:09 AM
Post by: eartrumpet on January 20, 2015, 07:16:09 AM
Are you using one of the new versions for OruxMaps (Elevate 2.3 or 2.4)? What dpi does your display have and what Elevate size are you using?
Best regards,
Tobias
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: 6745th@web.de on January 20, 2015, 08:11:08 AM
Post by: 6745th@web.de on January 20, 2015, 08:11:08 AM
Version 2.3
Samsung s4 with hires screen.
XL version.
If there is a 2.4 version, I will test that after work.
Greetings Thomas
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on January 20, 2015, 10:19:21 PM
Post by: eartrumpet on January 20, 2015, 10:19:21 PM
Quote from: "6745th@web.de"Hi Tobias,
I just update Orux to the last version.
I just read in the other thread that you're using the latest beta, I thought you meant the newest release version.
I haven't tested the new beta yet, the themes are made for the release (=play store) version. I will release an adjusted version once the new version is no beta anymore, maybe a test version in advance. At the moment I'm quite busy otherwise, so I hope it takes some time until the release
Maybe the normal version of Elevate (means not the OruxMaps/Locus versions) work better again with the beta version.
Best regards,
Tobias
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: 6745th@web.de on January 21, 2015, 06:44:11 PM
Post by: 6745th@web.de on January 21, 2015, 06:44:11 PM
Only city areas having this crazy circles.
In the "outback" everything seems ok.
Beste grüsse,
Thomas
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: orux on January 21, 2015, 07:05:08 PM
Post by: orux on January 21, 2015, 07:05:08 PM
Quote from: "eartrumpet"Quote from: "6745th@web.de"Hi Tobias,
I just update Orux to the last version.
I just read in the other thread that you're using the latest beta, I thought you meant the newest release version.
I haven't tested the new beta yet, the themes are made for the release (=play store) version. I will release an adjusted version once the new version is no beta anymore, maybe a test version in advance. At the moment I'm quite busy otherwise, so I hope it takes some time until the release;-)
Maybe the normal version of Elevate (means not the OruxMaps/Locus versions) work better again with the beta version.
Best regards,
Tobias
Hi, Tobias;
You are right, the final version will take more time.
But the mapsforge libraries that are added to the current beta version should be the final libraries (0.5.0) including the support to renderthemes v4,
orux
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on January 21, 2015, 08:26:57 PM
Post by: eartrumpet on January 21, 2015, 08:26:57 PM
Quote from: "orux"
Hi, Tobias;
You are right, the final version will take more time.
But the mapsforge libraries that are added to the current beta version should be the final libraries (0.5.0) including the support to renderthemes v4,
orux
Yes, I'm already playing a bit with that, thanks for the quick move to 0.5.0
Because of rendertheme v4 and all its new possibilities I'm really looking forward to use it, but that means I'm not just gonna fix those turning circles, but lots of new stuff (easier variations with styles, permanent display of elements, priorities, symbol positioning, svgs...) - sounds like fun and I will need the time till release to add it all, so it's good to have the beta version already.
Best regards,
Tobias
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on January 23, 2015, 08:58:48 AM
Post by: eartrumpet on January 23, 2015, 08:58:48 AM
Here is a preview with svg icons:
This is work in progress, and by far not feature complete. A release version (probably with a PNG icon version, different sizes and Elements variation) will come with the play store release of this OruxMaps version.
I just made a quick conversion of Elevate 2.4, so it's not much tested.
I'm happy for bug reports like this:
Quote from: "6745th@web.de"
Wow that was a fast implementation.
Looks great.
Turning circles are also ok now.
One idea:
If I select "cycling" style, I can select mtb.
Now OM shows colored trials.
When I uncheck MTB OM should show a normal path/way.
Is that possible with the new theme format?
Danke Thomas
Thanks for testing and finding this bug
It just happened because you can switch off paths with mountain bike scale, what you couldn't till now. I will include a fall back path rendering for that case.
Best regards,
Tobias
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: 6745th@web.de on January 23, 2015, 02:34:24 PM
Post by: 6745th@web.de on January 23, 2015, 02:34:24 PM
Quote from: "eartrumpet"
It just happened because you can switch off paths with mountain bike scale, what you couldn't till now. I will include a fall back path rendering for that case.
Best regards,
Tobias
Perfect,
Thanks Thomas
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on January 25, 2015, 11:10:50 AM
Post by: eartrumpet on January 25, 2015, 11:10:50 AM
2.4.1 25/01/15
- added separate color for regional cycling routes (violet)
- removed place_of_worship from historic (like wayside_shrine)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on January 29, 2015, 10:29:59 PM
Post by: eartrumpet on January 29, 2015, 10:29:59 PM
There are many advantages with the possibilities of priorities for rendering captions and symbols, place names are much more reliably shown. Also I put all symbols into switchable categories. All hiking routes can be switched off as well, and also strong cycling and hiking routes for high zoom levels are now possible. Additional test and implementation of the new abilities are planed, therefore just a preview version:
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
I'm happy for any feedback!
All changes so far:
3.0.0 preview 29/01/15
- changed to mapsforge rendertheme-v4, only compatible with apps supporting mapsforge 0.5 and higher
- added mapsforge styles (hiking, city, cycling), removed variations Elevelo & Elegant
- Elements now has the same styles as Elevate, the only difference is most zoom mins and low zoom markers are removed
- moved all symbols incl. captions in switchable overlays
- made settlement names/hiking routes/mtb tags switchable
- added switchable strong hiking/cycling routes for zoom level 14+
- added svg version, optimized for 320dpi
- added some priorities/display, map-background-outside
- changed low zoom markers, font size for contour lines text zl 16+
- removed landcover with tunnel=yes
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on February 18, 2015, 10:41:37 AM
Post by: eartrumpet on February 18, 2015, 10:41:37 AM
All information and limits about this preview versions see above.
In this second preview there are some major additions:
- public transport routes overlay for city style
- emphasized cycling ways (incl. transformed paths/footways if bicycle=yes) with surface information for cycling style
- improved overlays, now different map style defaults
- improved settlement name rendering, incl. capitals, quarter, neighbourhood
- new rendering for cliffs/ridges/aerialways/gorges/route refs
- removed limits to prevent symbols eliminating captions on ways (unnecessary with mf 0.5)
Quick install with Android browser:
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
Downloads:
I'm happy for any feedback!
All changes so far:
3.0.0 preview 2 18/02/15
- switched to mapsforge rendertheme-v4, only compatible with apps supporting mapsforge 0.5 and higher
- added svg version, optimized for 320dpi
- added mapsforge styles (hiking, city, cycling), removed variations Elevelo & Elegant
- Elements now has the same styles as Elevate, the only difference is most zoom mins and low zoom markers are removed
- moved all symbols and captions in switchable overlays
- made settlement names/routes/mtb tags switchable
- added switchable strong hiking/cycling routes for zoom level 14+
- added public transport routes overlay for city style
- added emphasized cycling ways (incl. transformed paths/footways if bicycle=yes) with surface information for cycling style, incl. cycleway=track/lane, changed cycling route colors
- added some priorities/display, map-background-outside, highway=emergency_access_point, natural=shingle, place=quarter, place=neighbourhood, power=plant, station=subway, capital=2/4
- changed low zoom markers, rendering for cliffs/ridges/aerialways/gorges, rendering for route refs, network rendering order, changed rendering for MTB-scale 5+6, separate rendering for railway=disused & abandoned, font size for contour lines text zl 16+, rendering of lock/dock/pier/bridleway, limited toll to highways, rendering for places
- removed landcover with tunnel=yes, some building keys for POIs, limits to prevent symbols eliminating captions on ways (unnecessary with mf 0.5)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: 6745th@web.de on February 18, 2015, 06:38:16 PM
Post by: 6745th@web.de on February 18, 2015, 06:38:16 PM
I did a short test.
Some ways are dashed, so it looks a bit confusing.
I think in the past it was different.
Wouldn't it be better to paint a solid line with dashed filling, like tiramisu?
What do you think?
Greetings,
Thomas
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on February 18, 2015, 09:43:02 PM
Post by: eartrumpet on February 18, 2015, 09:43:02 PM
Quote from: "6745th@web.de"
Some ways are dashed, so it looks a bit confusing.
I think in the past it was different.
Wouldn't it be better to paint a solid line with dashed filling, like tiramisu?
Hi Thomas,
thanks for your feedback. I've always used dashed to symbolize deteriorating track quality, something that I know form paper maps. The shorter the dashes, the worse the quality of the track, see also the map key:
Quote
Wouldn't it be better to paint a solid line with dashed filling, like tiramisu?
For me it's easier to see in bright light with a short look, than different shades of similar colors. So I stick to it - but it's nice to have choices
Best regards,
Tobias
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: 6745th@web.de on February 19, 2015, 06:17:48 PM
Post by: 6745th@web.de on February 19, 2015, 06:17:48 PM
Each "sub theme" stores his layers settings. Perfect
City- I switched all on,
Bike- I switched some off.
I used in the past the xl version.
With the new mf engine I use the svg version. Looks good.
Font scale I set to 1.1 symbol scale to 1.2.
I am sure, Orux will solve also the language bug, but with the workaround it is ok.
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on February 20, 2015, 08:35:34 AM
Post by: eartrumpet on February 20, 2015, 08:35:34 AM
Quote from: "6745th@web.de"You're theme is really amazing now Tobias.
Thanks! I'm still amazed about all new possibilities which make the new themes much more flexible. I think I added most major features I had in mind now, so now every feedback for fine tuning is valuable. Some smaller changes for optimized rendering are still pending, but those are more subtle.
QuoteEach "sub theme" stores his layers settings. Perfect
City- I switched all on,
Bike- I switched some off.
Great, that's what I had in mind - I like it when a have a choice as a user, that's why I made many categories to choose from. I hope they all make sense.
With city, do you have public transport routes AND public transport activated?
QuoteI used in the past the xl version.
With the new mf engine I use the svg version. Looks good.
Font scale I set to 1.1 symbol scale to 1.2.
Yes, the SVG version is more flexible, good that it already found its use. The biggest problem is that some symbols are not as clear as before without the slight glow effect, for example tram stops.
Best regards,
Tobias
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on March 09, 2015, 10:19:29 PM
Post by: eartrumpet on March 09, 2015, 10:19:29 PM
All information and limits about this preview versions see above.
This version is now feature complete, so it needs some testing and help for the (machine) translated map style menu labels.
In this third preview there was a lot of fine tuning:
- Elements optimized to have as little zoom-mins as possible
- maps style menus with english, french, german, italian and spanish labels, please help with corrections of some machine translated content
- settings are remembered for each style/theme in OruxMaps
- replaced all dy for symbols with symbol-id/position
- transformed paths/footways to cycleways if bicycle=yes (cycling), transformed cycleways to footways with cycling marker if foot=yes (hiking/city)
- added different zoom mins for different styles for some symbols
- added priorities for most symbols
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
I'm happy for any feedback!
All changes so far:
3.0.0 preview 3 09/03/15
- switched to mapsforge rendertheme-v4, only compatible with apps supporting mapsforge 0.5 and higher
- added svg version, optimized for 320dpi
- added mapsforge styles (hiking, city, cycling), removed variations Elevelo & Elegant
- Elements now has the same styles as Elevate, the only difference is most zoom mins and low zoom markers are removed
- moved all symbols and captions in switchable overlays with english, french, german, italian and spanish labels
- separate style and overlay ids for all styles, layers and theme variation, so settings are remembered for each style/theme in OruxMaps
- replaced all dy for symbols with symbol-id/position
- made settlement names/routes/mtb tags switchable
- added switchable strong hiking/cycling routes for zoom level 14+
- city: added public transport routes overlay
- cycling: added emphasized cycling ways with surface information, changed cycling route colors
- added different zoom mins for different styles for some symbols
- transformed paths/footways to cycleways if bicycle=yes (cycling), transformed cycleways to footways with cycling marker if foot=yes (hiking/city)
- added priorities/display, map-background-outside, highway=emergency_access_point, natural=shingle, place=quarter, place=neighbourhood, power=plant, station=subway, capital=2/4, cycleway=track/lane
- changed low zoom markers, rendering for cliffs/ridges/aerialways, rendering for route refs, network rendering order, changed rendering for MTB-scale 5+6, separate rendering for railway=disused & abandoned, font size for contour lines text zl 16+, rendering of lock/dock/pier/bridleway/swimming_pool, limited toll to highways, rendering for places, captions for dam/weir/dock/lock, colors for post_box/atm/bank/fuel, simplified tracks for zoom 12/13, symbol for place_of_worship unknown
- removed landcover with tunnel=yes, some building keys for POIs, limits for symbols eliminating captions on ways (unnecessary with mf 0.5)
- some clean-up, fine tuning and other changes I forgot
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on March 21, 2015, 11:28:42 AM
Post by: eartrumpet on March 21, 2015, 11:28:42 AM
This version is now optimized for mapsforge 0.5.1 (OruxMaps6.4.0beta8+), lines/lineSymbols/pathText with dy are now correctly rendered only with apps with 0.5.1. Otherwise mainly detail optimizations. I added a new rendering for tunnels, more reliable rendering of route refs at low zooms, a pattern for bicycle=no on highways and access patterns on highway areas.
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
I'm happy for any feedback!
All changes so far:
3.0.0 preview 4 21/03/15
- switched to mapsforge rendertheme-v4, only compatible with apps supporting mapsforge 0.5 and higher, optimized for mapsforge 0.5.1
- added svg version, optimized for 320dpi
- added mapsforge styles (hiking, city, cycling), removed variations Elevelo & Elegant
- Elements now has the same styles as Elevate, the only difference is most zoom mins and low zoom markers are removed
- moved all symbols and captions in switchable overlays with english, french, german, italian and spanish labels
- separate style and overlay ids for all styles, layers and theme variation, so settings are remembered for each style/theme in OruxMaps
- replaced all dy for symbols with symbol-id/position
- made settlement names/routes/mtb tags switchable
- added switchable strong hiking/cycling routes for zoom level 14+
- city: added public transport routes overlay
- cycling: added emphasized cycling ways with surface information, changed cycling route colors
- added different zoom mins for different styles for some symbols
- transformed paths/footways to cycleways if bicycle=yes (cycling), transformed cycleways to footways with cycling marker if foot=yes (hiking/city)
- added priorities/display, map-background-outside, highway=emergency_access_point, natural=shingle, place=quarter, place=neighbourhood, place=farm, power=plant, station=subway, capital=2/4, cycleway=track/lane, transparency for sand/aerodrome/university/sea, pattern for bicycle=no on highways, access for highway areas
- changed low zoom markers, rendering for cliffs/ridges/aerialways, rendering for route refs, network rendering order, changed rendering for MTB-scale 5+6, separate rendering for railway=disused & abandoned, font size for contour lines text zl 16+, rendering of lock/dock/pier/bridleway/swimming_pool, limited toll to highways, rendering for places, captions for dam/weir/dock/lock, colors for post_box/atm/bank/fuel, simplified tracks for zoom 12/13, symbol for place_of_worship unknown, rendering of path/track etc. names, rendering of tunnels
- removed landcover with tunnel=yes, some building keys for POIs, limits for symbols eliminating captions on ways (unnecessary with mf 0.5)
- some clean-up, fine tuning and other changes I forgot
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: orux on March 21, 2015, 11:54:41 AM
Post by: orux on March 21, 2015, 11:54:41 AM
Quote from: "eartrumpet"Fourth preview for Elevate 3
This version is now optimized for mapsforge 0.5.1 (OruxMaps6.4.0beta8+), lines/lineSymbols/pathText with dy are now correctly rendered only with apps with 0.5.1. Otherwise mainly detail optimizations. I added a new rendering for tunnels, more reliable rendering of route refs at low zooms, a pattern for bicycle=no on highways and access patterns on highway areas.
Hi, Tobías,
the orux-mf-theme: links must be:
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
orux-mf-theme://
to be catched by the app.
orux
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on March 21, 2015, 01:14:49 PM
Post by: eartrumpet on March 21, 2015, 01:14:49 PM
Quote from: "orux"
the orux-mf-theme: links must be:
Thanks, I was too quick with copy and paste and didn't delete all html, now it should work.
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on March 29, 2015, 01:29:55 PM
Post by: eartrumpet on March 29, 2015, 01:29:55 PM
As many apps aren't (e.g. the current OruxMaps playstore version 6.0.7) I also added a legacy version Elevate 2.5 which has many of the improvements of Elevate 0.3, as far as possible.
Both versions can be downloaded here:
The big improvements of Elevate 3.0 are:
Map styles are now integrated in one theme file, this means hiking/cycling/city can now be selected directly, only Elements needs another theme file. The map styles differ more than before.
Overlays make it possible to switch on or off of different elements, e.g. captions, symbols, protected areas etc.
Additional overlays are showing now better visible and emphasized hiking or cycling routes or are a public transport network is shown.
Priorities make it possible that settlement names and important symbols are shown much more reliably.
A version with SVG-symbols is now scalable for all kinds of devices. The size variants are now only necessary because the glow of symbols there makes them easier to see.
Elements now supports all map styles as in Elevate with hiking, city or cycling. The difference is that everything is shown as soon it is contained in the map data.
Additionally many improvements and new map elements have been added, in Elevate 3.0 as well as in Elevate 2.5:
Cycling: cycleways are now emphasized and surface information is shown.
Cycling: paths and footways with cycling=yes are now rendered like cycleways.
Accompanying cycle lanes/tracks on roads are now shown.
Hiking/city: cycleways with foot=yes are now rendered like footways.
New settlement names like capitals, farms and quarters are now shown.
And many more smaller improvements and additions.
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on May 26, 2015, 10:51:52 PM
Post by: eartrumpet on May 26, 2015, 10:51:52 PM
All changes:
3.0.1 26/05/15
- added Locus version with limited support of new abilities and no switchable overlays
- added outline to SVG symbols for better perceptibility
- changed display of public transport stations, now analogous to public transport network of city style
- optimized low zoom rendering - no highway casings until level 13, changed cores until level 12, added various zoom-mins, changed border/railway rendering
- added bordertext for protected areas on high zooms, names for trunks/motorways, bic_designated/ft_designated, theme icons for Locus theme selector, slight transparency for white caption outlines
- removed underscores from filenames, some mapsforge 0.3 style file paths, basin/water caption from fountain, borders for some landcovers, pois with information=* from tourism=information
- changed rendering order for areas/pedestrian highways, rendering of fountain/basin/reservoir/drain/canal/aerialway, rendering of landscape names, rendering of waterway=dam, rendering of waterway names, rendering of cycleways with no surface information, rendering of runways
- moved ski pistes below paths
2.5.1 26/05/15
- optimized low zoom rendering - no highway casings until level 13, changed cores until level 12, added various zoom-mins, changed border/railway rendering
- added bordertext for protected areas on high zooms, theme icons for Locus theme selector, names for trunks/motorways, bic_designated/ft_designated
- removed basin/water caption from fountain, borders for some landcovers, pois with information=* from tourism=information
- changed rendering order for areas/pedestrian highways, rendering of fountain/basin/reservoir/drain/canal/aerialway, rendering of landscape names, rendering of waterway=dam, rendering of waterway names, rendering of cycleways with no surface information
- moved ski pistes below paths
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on May 27, 2015, 10:18:02 PM
Post by: eartrumpet on May 27, 2015, 10:18:02 PM
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on June 07, 2015, 03:27:32 PM
Post by: eartrumpet on June 07, 2015, 03:27:32 PM
It's more important for Locus users, as switchable overlays are now possible.
For all others rendering of street names and route refs are now more reliable.
3.0.2 07/06/15
- Locus: uses now mapsforge 0.5 map styles including switchable overlays
- Locus optimizations: simplified some SVG symbols, moved building captions, new theme switcher icons
- added priority/display to street names/route refs
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on June 23, 2015, 10:03:16 PM
Post by: eartrumpet on June 23, 2015, 10:03:16 PM
3.0.3 23/06/15
- Locus: added .nomedia for map style chooser symbols
- removed cycleway=track/lane from footway/track/path/motorway
- added border to riverbank/natural=water, cycling: symbol for private/no bike gates starting zoom 15
- reduced area borders slightly
- optimized low zoom highways, low zoom local hiking routes, mid zoom street names
2.5.2 23/06/15
- Locus: added .nomedia for map style chooser symbols
- removed cycleway=track/lane from footway/track/path/motorway
- added border to riverbank/natural=water
- reduced area borders slightly
- optimized low zoom highways, low zoom local hiking routes, mid zoom street names
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on July 19, 2015, 09:51:48 PM
Post by: eartrumpet on July 19, 2015, 09:51:48 PM
3.0.4 19/07/15
- made contour lines optional for city style, disabled by default
- some items are now in several overlays (fuel in shops & cars, aerial ways in public transport & outdoor, alpine huts in outdoor & accommodation, toll in car & cycling style)
- changed rendering for path/footway in city style, color for mtb routes so that they distinguish better from roads, rendering for low zoom routes
- added kissing_gate, turnstile
2.5.3 19/07/15
- added kissing_gate, turnstile, low zoom mtb routes
- changed rendering for path/footway in city style, color for mtb routes so that they distinguish better from roads, rendering for low zoom routes
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on August 07, 2015, 03:01:15 PM
Post by: eartrumpet on August 07, 2015, 03:01:15 PM
All changes:
- added trail_visibility rendering to path/footway without sac_scale, added access=no for various items (rendered like access=private)
- added closed=yes to landcover and water areas (incl. fallback option) to avoid some rendering issues with double tagging on ways and relations
- changed access=no to access=acc_no for maps starting 30/07/15
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on September 19, 2015, 08:44:23 PM
Post by: eartrumpet on September 19, 2015, 08:44:23 PM
3.0.6 19/09/15
- changed rendering for footways/paths without sac_scale for hiking style: brown means unpaved path/footway (or path without surface information); grey means paved path/footway (or footway without surface information)
- Locus: changed tunnels to Elevate 2 style (as dy isn't working properly on ways)
- corrected surface width for some highways
- limited national hiking/cycling routes to ZL8
- changed low to mid zoom rendering of highway refs, rendering of basin borders, (inter)national hiking routes on paths, colors of major highways, rendering of bridleways, zoom-min for bridges, track cores, xsd location
- removed leisure=track from ski pistes
- added glacier border, zoom-min for pistes, low zoom motorway tunnels, memorial types
- viewpoint now in both tourism and outdoor overlays
2.5.5 19/09/15
- changed rendering for footways/paths without sac_scale for hiking style: brown means unpaved path/footway (or path without surface information); grey means paved path/footway (or footway without surface information)
- corrected surface width for some highways
- limited national hiking/cycling routes to ZL8
- changed public transport stations to Elevate 3 style markers, rendering of basin borders, (inter)national hiking routes on paths, colors of major highways, rendering of bridleways, zoom-min for bridges, track cores, xsd location
- removed leisure=track from ski pistes
- added glacier border, zoom-min for pistes, low zoom motorway tunnels, memorial types
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: ianL on September 28, 2015, 10:01:15 AM
Post by: ianL on September 28, 2015, 10:01:15 AM
I am trying to use Elevate 3 but without success on a New Zealand map downloaded from OpenAndroMaps in August 2015 I have OruxMaps version 6.0.10 Elevate 2.5 works OK
Back in March 2015 you say
"Please take notice that this version (Elevate 3) can only used with apps that are compatible with mapsforge 0.5, e.g. OruxMaps 6.4beta and later"
I cannot find reference to which version of Elevate is correct for non-beta versions of OruxMaps
Could you please clarify if Elevate 3 should work OK with OM 6.0.10?
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on September 28, 2015, 10:03:16 PM
Post by: eartrumpet on September 28, 2015, 10:03:16 PM
Quote from: "ianL"Hello eartrumpet
I am trying to use Elevate 3 but without success on a New Zealand map downloaded from OpenAndroMaps in August 2015 I have OruxMaps version 6.0.10 Elevate 2.5 works OK
Nothing has changed, Elevate 3 still requires 6.4 beta or higher (currently 6.5RC2 here:
OruxMaps 6.0.10 is not compatible, as all 6.0.* versions. You can find the reference at the download page under the heading "Elevate 2".Quote from: "ianL"I cannot find reference to which version of Elevate is correct for non-beta versions of OruxMaps
Could you please clarify if Elevate 3 should work OK with OM 6.0.10?
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: ianL on September 29, 2015, 01:02:23 AM
Post by: ianL on September 29, 2015, 01:02:23 AM
I see the reference to OM versions has been updated since I last looked at the Elevate 2 explanatory text - that's very helpful
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on September 29, 2015, 09:42:04 PM
Post by: eartrumpet on September 29, 2015, 09:42:04 PM
Quote from: "ianL"Thanks for the prompt reply
I see the reference to OM versions has been updated since I last looked at the Elevate 2 explanatory text - that's very helpful
Yes, sorry, I thought that it would be clear that a version with 6.0.anything like 6.0.10 is still even it is released later still has not the features of 6.4beta and later.
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on October 12, 2015, 10:21:05 AM
Post by: eartrumpet on October 12, 2015, 10:21:05 AM
Low zooms are much more usable now, including state and mountain range names. Larger areas of interest and their captions appear earlier, smaller later.
For better visibility some highway colors have been changed, most prominently: (inter)national cycling routes are now violet, regional are red.
And a lot of smaller changes to optimize behaviour at different zoom levels.
All changes:
3.1.0 08/10/15
- low zoom areas are now much more usable: names for states and mountain ranges/areas are displayed, names of lakes/glaciers/woods/mountain ranges/protected for larger areas are displayed earlier and for smaller areas later (differs for city style)
- it's easier to distinguish between routes and highways as colors are optimized: (inter)national cycling routes are now violet, regional are red (already changed mtb routes and colors of major highways in earlier versions)
- improved Elements: limited symbols and captions somewhat to make low zooms less random and more usable
- added place=state, natural=mountain_range, natural=mountain_area for low zooms, bboxweight for poly_labels, zoom-min for ditch/stream/drain/river/canal/railway/pier/runway/apron/taxiway, different colors for some landscape names, small ford symbol for Elements low zooms
- changed rendering of settlement names, zoom-min for island captions/forest areas, low zoom hiking/cycling routes, captions & rendering of protected areas
- fixed rendering of low zoom motorway tunnels, volcano low zoom captions
2.6.0 08/10/15
- low zoom areas are now much more usable: names for states and mountain ranges/areas are displayed, names of lakes/glaciers/woods/mountain ranges/protected for larger areas are displayed earlier and for smaller areas later (differs for Elegant)
- it's easier to distinguish between routes and highways as colors are optimized: (inter)national cycling routes are now violet, regional are red (already changed mtb routes and colors of major highways in earlier versions)
- added place=state, natural=mountain_range, natural=mountain_area for low zooms, bboxweight for poly_labels, different colors for some landscape names, small ford symbol for Elements low zooms
- changed rendering of settlement names, zoom-min for island captions/forest areas, low zoom hiking/cycling routes, captions & rendering of protected areas
- fixed rendering of low zoom motorway tunnels, volcano low zoom captions
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on November 10, 2015, 10:12:27 PM
Post by: eartrumpet on November 10, 2015, 10:12:27 PM
3.1.1 10/11/15
- optimized SVG symbols, rerendered PNG symbols
- changed rendering of tracks, rendering of routes at ZL 12+13, color of contour lines, rendering of pipelines
- added shop=travel_agency, new symbol for pub, amenity=bar
2.6.1 10/11/15
- rerendered PNG symbols on optimized Elevate 3 SVG symbol basis
- changed rendering of tracks, rendering of routes at ZL 12+13, color of contour lines, rendering of pipelines
- added shop=travel_agency, new symbol for pub, amenity=bar
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on January 10, 2016, 12:18:12 PM
Post by: eartrumpet on January 10, 2016, 12:18:12 PM
3.1.2 10/01/16
- added oneway:bicycle=no for cycling style (turquoise arrow added where cycling is allowed in opposite direction of oneway streets), name captions in city style for retail/commercial/industrial/brownfield/garages/construction/greenfield, name caption for residential/farmyard/farm landuses
- changed ZL for high zoom forest/wood/desert captions
2.6.2 10/01/16
- added name caption for residential/farmyard/farm landuses
- changed ZL for high zoom forest/wood/desert captions
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on January 19, 2016, 09:59:13 PM
Post by: eartrumpet on January 19, 2016, 09:59:13 PM
The big improvements of Elevate 3.0 are:
- Map styles are now integrated in one theme file, this means hiking/cycling/city can now be selected directly, only Elements needs another theme file. The map styles differ more than before.
- Overlays make it possible to switch on or off of different elements, e.g. captions, symbols, protected areas etc.
- Additional overlays are showing now better visible and emphasized hiking or cycling routes or are a public transport network is shown.
- Priorities make it possible that settlement names and important symbols are shown much more reliably.
- A version with SVG-symbols is now scalable for all kinds of devices. The size variants are now only necessary because the glow of symbols there makes them easier to see.
- Elements now supports all map styles as in Elevate with hiking, city or cycling. The difference is that everything is shown as soon it is contained in the map data.
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on February 09, 2016, 12:22:34 PM
Post by: eartrumpet on February 09, 2016, 12:22:34 PM
3.1.3 09/02/16
- limited bicycle=no marking to relevant highways in cycling style
- restructured path rendering rules, fixed some missing trail_visibility information for path/footway without sac_scale in hiking style, fixed color for cycleway with foot=yes without surface information in hiking
- added bicycle access information for path/footway in hiking/city style, added weak priority for ele captions, leisure=picnic_table
- Locus: moved most captions for symbols to zoom level 17 and higher because of missing priorities/different collision management/missing dy on areas in Locus
2.6.3 09/02/16
- limited bicycle=no marking to relevant highways in cycling style
- restructured path rendering rules, fixed some missing trail_visibility information for path/footway without sac_scale in hiking style, fixed color for cycleway with foot=yes without surface information in hiking
- added bicycle access information for path/footway in hiking/city style, leisure=picnic_table
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on February 09, 2016, 10:46:09 PM
Post by: eartrumpet on February 09, 2016, 10:46:09 PM
3.1.4 09/02/16
- fixed path/footway rendering rules
2.6.4 09/02/16
- fixed path/footway rendering rules
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on March 07, 2016, 10:04:55 PM
Post by: eartrumpet on March 07, 2016, 10:04:55 PM
The major changes for Elevate 3 are optimized low and very low zooms incl. markers for cities/capitals, rendering of crevasses in glaciers and better captions for small SVG symbols.
3.1.5 07/03/16
- added caravan_site to low zoom markers, border for admin_level=3, natural=crevasse, low zoom markers for cities/capitals
- changed admin borders, rendering of some place names, rendering of low zoom (inter)national routes, moved low zoom highways to level 11 and lower, reduced caption/symbol distance for small SVG symbols (non-Locus), optimized very low zooms
- corrected spanish translation for overlay menus
- Locus: moved protected area borders to zoom level 16 because of rendering issue
2.6.5 07/03/16
- added caravan_site to low zoom markers, border for admin_level=3, natural=crevasse
- changed admin borders
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on March 16, 2016, 10:19:14 PM
Post by: eartrumpet on March 16, 2016, 10:19:14 PM
3.1.6 16/03/16
- changed leisure=track to leisure=ls_track, larger symbol/earlier ZL for amenity=bus_station
- corrected SVG scale factor for public transport network stations, removed SVG scaling in Locus PNG versions
- removed leisure=ls_track from highways/tourism, moved highway=raceway upwards, moved residential landuse etc. to level 12+
2.6.6 16/03/16
- changed leisure=track to leisure=ls_track, larger symbol/earlier ZL for amenity=bus_station
- removed leisure=ls_track from highways/tourism, moved highway=raceway upwards, moved residential landuse etc. to level 12+
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on May 03, 2016, 10:23:56 PM
Post by: eartrumpet on May 03, 2016, 10:23:56 PM
With the major change to scalable graphics in the last test version I made the step to offer
Another
4.0 beta 03/05/16
- one size only: SVG version which scales with screen density is now default (instead of various sizes, removed those)
- Locus: added "dp" to all values for adjusting to screen density
- new SVG patterns that scale with screen density, changed pattern zoom behaviour
- reworked routes: new unified colors for hiking and cycling routes, seperate colors for international and national routes, new low zoom rendering for hiking routes on paths, optimized route rendering
- added tourism=apartment, zoom-min to some bridges and tunnels, extra pattern colors for access=private (orange) and access=no (red)
- changed low zoom captions, cycle and hike nodes, captions for protected areas, symbol for tourism=chalet, cliff rendering, motorway_junction caption, high zoom hiking routes on cycleways, access patterns
- limited capital to certain places, removed sled pistes from cycling mapstyle
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: 6745th@web.de on May 05, 2016, 08:50:28 PM
Post by: 6745th@web.de on May 05, 2016, 08:50:28 PM
Hallo Tobias,
heute habe ich die neueste Germany.map und die aktuelle 3er elevate Version installiert.
(Die vorherige 3er Version hat prima funktioniert)
Damit sehe ich nur die Wanderwege, nicht die mtb Routen, (Einstellung steht in orux auf Radfahren.)
Dann habe ich die 4er Version installiert, das selbe.
Dann die 2er, damit ist es OK.
2er, so soll es aussehen. Oben Rad Route r3, unten eine mtb route.
3er und 4er, Einstellung "radfahren".
CW und WW sind vermutlich wander Routen, jedenfalls keine Rad Routen.
Idee?
Beste grüße,
Thomas
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on May 05, 2016, 09:22:38 PM
Post by: eartrumpet on May 05, 2016, 09:22:38 PM
Quote from: "6745th@web.de"
Damit sehe ich nur die Wanderwege, nicht die mtb Routen, (Einstellung steht in orux auf Radfahren.)
Hallo Thomas,
das ist ein Bug in OruxMaps 6.5.5/6.5.4 Beta 11, die Einstellungen unter "Mapsforge theme optimieren" werden nicht angenommen, siehe hier:
Entweder Beta 10 oder 6.5.0 benutzen, oder auf den Bugfix warten.
Viele Grüße,
Tobias
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: 6745th@web.de on May 05, 2016, 09:34:41 PM
Post by: 6745th@web.de on May 05, 2016, 09:34:41 PM
danke für die schnelle Antwort.
José wird daß sicherlich bald fixen. Ich benutze solange die 2er elevate Version.
Alles Gute,
Thomas
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on May 06, 2016, 08:42:04 AM
Post by: eartrumpet on May 06, 2016, 08:42:04 AM
Quote from: "6745th@web.de"
José wird daß sicherlich bald fixen.
Schon passiert:
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on May 09, 2016, 08:32:29 PM
Post by: eartrumpet on May 09, 2016, 08:32:29 PM
Download:
4.0 beta2 09/05/16
- one size only: SVG version which scales with screen density is now default (instead of various sizes, removed those)
- Locus: added "dp" to all values for adjusting to screen density
- new SVG patterns that scale with screen density (except Locus, fixed size necessary atm), changed pattern zoom behaviour
- reworked routes: seperate colors for international and national routes (same for hiking and cycling - blue and green), new low zoom rendering for hiking routes on paths, optimized route rendering
- added tourism=apartment, zoom-min to some bridges and tunnels, seperate pattern colors for access=private (orange) and access=no (red)
- changed low zoom captions, cycle and hike nodes, captions for protected areas, symbol for tourism=chalet, cliff rendering, motorway_junction caption, high zoom hiking routes on cycleways, access patterns
- limited capital to certain places, removed sled pistes from cycling mapstyle
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on May 18, 2016, 08:53:15 PM
Post by: eartrumpet on May 18, 2016, 08:53:15 PM
Download:
4.0 beta3 18/05/16
- one size only: SVG version which scales with screen density is now default (instead of various sizes, removed those)
- new SVG patterns that scale with screen density, changed pattern zoom behaviour
- new MTB mapstyle: new rendering for mtb_scale_uphill, added trail_visibility to paths, removed mtb_scale from highways with access limits
- reworked routes: seperate colors for international and national routes (same for hiking and cycling - blue and green), new low zoom rendering for hiking routes on paths, optimized route rendering
- Locus: added "dp" to all values for adjusting to screen density, added standard V4 version, renamed Locus edition with "LE"
- added tourism=apartment, zoom-min to some bridges and tunnels, seperate pattern colors for access=private (orange) and access=no (red)
- changed low zoom captions, cycle and hike nodes, captions for protected areas, symbol for tourism=chalet, cliff rendering, motorway_junction caption, high zoom hiking routes on cycleways, access patterns, moved observation tower to outdoor overlay, removed viewpoint from towers, rendering for sac_scale 5/6 limited capital to certain places, removed sled pistes from cycling mapstyle
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on May 29, 2016, 01:15:12 PM
Post by: eartrumpet on May 29, 2016, 01:15:12 PM
The biggest change concerns access limits, those are filtered now: a way with only private/no access is only rendered as that in hiking (or cycling) mapstyle, if this access limit is also valid for pedestrians (or cyclers). Only the city mapstyle shows general access limits.
Downloads:
4.0 RC 29/05/16
- one size only: SVG version which scales with screen density is now default (instead of various sizes, removed those)
- new SVG patterns that scale with screen density, changed pattern zoom behaviour
- new MTB mapstyle: new rendering for mtb_scale_uphill, added trail_visibility to paths, removed mtb_scale from highways with bicycle=no
- reworked routes: seperate colors for international and national routes (same for hiking and cycling - blue and green), new low zoom rendering for hiking routes on paths, optimized route rendering
- reworked access markings: seperate pattern colors for access=private (orange) and access=no (red), more complex filtering of access rules on highways, new access patterns
- Locus: added "dp" to all values for adjusting to screen density, added standard V4 version, renamed Locus edition with "LE"
- added tourism=apartment, zoom-min to some bridges and tunnels, seperate rendering for private playgrounds
- changed low zoom captions, cycle and hike nodes, captions for protected areas, symbol for tourism=chalet, cliff rendering, motorway_junction caption, high zoom hiking routes on cycleways, moved observation tower to outdoor overlay, removed viewpoint from towers, rendering for sac_scale 5/6, limited capital to certain places, removed sled pistes from cycling mapstyle, optimized emphasized cycleways
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on June 06, 2016, 10:19:19 PM
Post by: eartrumpet on June 06, 2016, 10:19:19 PM
Download:
4.0 RC2 06/06/16
- one size only: SVG version which scales with screen density is now default (instead of various sizes, removed those)
- new SVG patterns that scale with screen density, changed pattern zoom behavior
- new MTB mapstyle: new rendering for mtb_scale_uphill, added trail_visibility to paths, removed mtb_scale from highways with bicycle=no
- reworked routes: separate colors for international and national routes (same for hiking and cycling - blue and green), new low zoom rendering for hiking routes on paths, optimized route rendering
- reworked access markings: separate pattern colors for access=private (orange) and access=no (red), more complex filtering of access rules on highways, new access patterns
- Locus: added "dp" to all values for adjusting to screen density, added standard V4 version, renamed Locus edition with "LE"
- added tourism=apartment, zoom-min to some bridges and tunnels, separate rendering for private playgrounds, natural=cape/crater/bay/peninsula/fjord/canyon, place=islet/archipelago/sea/ocean
- changed low zoom captions, cycle and hike nodes, captions for protected areas, symbol for tourism=chalet, cliff rendering, motorway_junction caption, high zoom hiking routes on cycleways, moved observation tower to outdoor overlay, removed viewpoint from towers, rendering for sac_scale 5/6, limited capital to certain places, removed sled pistes from cycling mapstyle, optimized emphasized cycleways, removed bridges from tunnels, changed cycleway=track to cycleway=cw_track, rendering cores instead of tunnels at low zooms
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on July 06, 2016, 09:39:13 PM
Post by: eartrumpet on July 06, 2016, 09:39:13 PM
Downloads:
4.0 RC3 06/07/16
- one size only: SVG version which scales with screen density is now default (instead of various sizes, removed those)
- new SVG patterns that scale with screen density, changed pattern zoom behavior
- new MTB mapstyle: new rendering for mtb_scale_uphill, added trail_visibility to paths, removed mtb_scale from highways with bicycle=no
- reworked routes: separate colors for international and national routes (same for hiking and cycling - blue and green), new low zoom rendering for hiking routes on paths, optimized route rendering
- reworked access markings: separate pattern colors for access=private (orange) and access=no (red), more complex filtering of access rules on highways, new access patterns
- Locus: added "dp" to all values for adjusting to screen density, added standard V4 version, renamed Locus edition with "LE"
- added tourism=apartment, zoom-min to some bridges and tunnels, separate rendering for private playgrounds, natural=cape/crater/bay/peninsula/fjord/canyon, place=islet/archipelago/sea/ocean, areas for highway=track/steps, names for highway areas, bicycle=no for areas, low zoom tunnels, areas for archaeological_site, natural=hot_spring, shop=mall
- changed low zoom captions, cycle and hike nodes, captions for protected areas, symbol for tourism=chalet, cliff rendering, motorway_junction caption, high zoom hiking routes on cycleways, moved observation tower to outdoor overlay, removed viewpoint from towers, rendering for sac_scale 5/6, limited capital to certain places, removed sled pistes from cycling mapstyle, optimized emphasized cycleways, removed bridges from tunnels, changed cycleway=track to cycleway=cw_track, removed amenity=drinking_water with drinking_water=no, optimized highway area rendering
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on July 10, 2016, 11:22:31 PM
Post by: eartrumpet on July 10, 2016, 11:22:31 PM
Downloads as alway on the Elevate page:
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on July 31, 2016, 08:54:05 PM
Post by: eartrumpet on July 31, 2016, 08:54:05 PM
4.0.1 31/07/16
- reduced width of roads/buildings for less excessive scaling on very high dpi devices
- increased width of highway=pedestrian
- Locus: fixed rendering of most symbol captions at ZL 17+, limited village names in Elevate LE to ZL 12+
- some name changes in the overlay menu
Downloads as always on the Elevate page:
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on September 03, 2016, 02:34:10 PM
Post by: eartrumpet on September 03, 2016, 02:34:10 PM
Downloads:
4.1beta 03/09/16
- added waymark symbols for maps from late August on
- new rendering of hiking routes
- new trail_visibility rendering/combinations
- reduced symbol size to match better those of Elevate 3 PNG versions, fixed dy for tunnels
- added: man_made=dyke/embankment/groyne
- Locus: limited village names in Elevate LE to ZL 12+ (this time for real)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on September 14, 2016, 05:01:17 PM
Post by: eartrumpet on September 14, 2016, 05:01:17 PM
All changes:
4.1.0 14/09/16
- added waymark symbols for maps from late August 2016 and later
- new rendering of hiking routes
- new trail_visibility rendering/combinations, new rendering of tracks without tracktype
- reduced symbol size to match better those of Elevate 3 PNG versions
- added: man_made=dyke/embankment/groyne
- fixed MTBS1 and MTBS3 rendering for tracks, dy for tunnels, Locus: limited village names in Elevate LE to ZL 12+ (this time for real)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing the
Post by: eartrumpet on September 26, 2016, 12:05:38 PM
Post by: eartrumpet on September 26, 2016, 12:05:38 PM
4.1.1 26/09/16
- changed rendering of waymark captions, optimized hiking route rendering
- fixed a bug in tunnel definitions
2.7.0 25/09/16
- new trail_visibility rendering/combinations, new rendering for sac_scale 5/6, new rendering of tracks without tracktype, new rendering for mtb_scale_uphill
- added tourism=apartment, natural=hot_spring, separate rendering for private playgrounds, shop=mall, areas for highway=track/steps, names for highway areas, separate pattern colors for access=private (orange) and access=no (red), man_made=dyke/embankment/groyne, low zoom tunnels, areas for archaeological_site, zoom-min to some tunnels, natural=cape/crater/bay/peninsula/fjord/canyon, place=islet/archipelago/sea/ocean, locus-extended="1" to Locus only themes
- optimized emphasized cycleways, changed cycleway=track to cycleway=cw_track, removed amenity=drinking_water with drinking_water=no, changed symbol for chalet, optimized highway area rendering, motorway_junction caption, limited capital to certain places, removed mtb_scale from highways with bicycle=no, changed cycle and hike nodes, removed viewpoint from towers, removed bridges from tunnels, changed high zoom hiking routes on cycleways, changed low zoom place captions, changed captions for protected areas, moved low zoom highways to level 11 and lower
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on October 10, 2016, 01:27:19 PM
Post by: eartrumpet on October 10, 2016, 01:27:19 PM
All changes:
4.1.2 10/10/16
- added waymarks for _right foregrounds, embankment=yes, separate rendering for sac_scale=difficult_alpine_hiking
- changed rendering of dyke/embankment, retaining_wall, golf_course, admin-borders, trail_visibility combinations (now: excellent+good, intermediate, bad+horrible+no), crevasse, crater
- fixes for waymarks
2.7.1 10/10/16
- added embankment=yes, separate rendering for sac_scale=difficult_alpine_hiking
- fixed bug in Elegant_City
- changed rendering of dyke/embankment, golf_course, trail_visibility combinations (now: excellent+good, intermediate, bad+horrible+no), admin-borders, crevasse, crater
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on November 29, 2016, 10:10:54 PM
Post by: eartrumpet on November 29, 2016, 10:10:54 PM
All changes:
4.1.3 29/11/16
- added colored names for waymarks, cycleway lanes/tracks left/right/both in cycling mapstyle, man_made=cross
- changed some waymark symbols, high zoom level country borders, highway refs on mid-level, removed route refs from highways, Locus: spacing for city symbols
2.7.2 29/11/16
- added man_made=cross
- removed route refs from highways, changed high zoom level country borders, highway refs
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on December 19, 2016, 01:42:45 PM
Post by: eartrumpet on December 19, 2016, 01:42:45 PM
All changes:
4.1.4 19/12/16
- added cycleway_lane/cycleway_track, overlay option for mtb_scale on roads
- changed path areas, mtb_scale on roads
- fixed man_made=cross, Locus ZL 12 tunnels
2.7.3 19/12/16
- added cycleway_lane/cycleway_track (both sides only)
- changed path areas, mtb_scale on roads
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on March 11, 2017, 08:40:29 PM
Post by: eartrumpet on March 11, 2017, 08:40:29 PM
All changes:
4.1.5 11/03/17
- added intermittent=yes for waterbodies, access=permit
- smaller borders for normal/italic settlement captions
- Locus: changed to new feature scale-line-dy-by-zoom, removed lots of workarounds
2.7.4 11/03/17
- added intermittent=yes for waterbodies, access=permit
- smaller borders for normal/italic settlement captions
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on May 18, 2017, 09:34:27 PM
Post by: eartrumpet on May 18, 2017, 09:34:27 PM
4.1.6 18/05/17
- added natural=stone/rock for nodes, amenity=hunting_stand (in special buildings overlay)
- changed rendering for living_street, rendering for surface=smooth_paved for maps starting May 2017 (with separate surface=paved tagging)
2.7.5 18/05/17
- added natural=stone/rock for nodes, amenity=hunting_stand
- changed rendering for living_street, rendering for surface=smooth_paved for maps starting May 2017 (with separate surface=paved tagging)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on July 10, 2017, 09:41:20 PM
Post by: eartrumpet on July 10, 2017, 09:41:20 PM
4.1.7 10/07/17
- added man_made=cutline, man_made=cairn, support for sac_scale=T5/T6 (for maps August 2017 and later)
- removed yes-value from via_ferrata_flag, changed name of special buildings overlay to "special buildings + orientation", moved guidepost to this overlay
2.7.6 10/07/17
- added man_made=cutline, man_made=cairn, support for sac_scale=T5/T6 (for maps August 2017 and later)
- removed yes-value from via_ferrata_flag
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: orux on July 18, 2017, 08:40:25 AM
Post by: orux on July 18, 2017, 08:40:25 AM
Quote from: "eartrumpet"Elevate 4 and Elevate 2 have been updated. Some new map features are rendered, and the theme is ready for some internal transition of sac_scale processing. Also the special buildings overlay has been renamed to "special buildings + orientation" and guidepost has been moved to this overlay.
4.1.7 10/07/17
- added man_made=cutline, man_made=cairn, support for sac_scale=T5/T6 (for maps August 2017 and later)
- removed yes-value from via_ferrata_flag, changed name of special buildings overlay to "special buildings + orientation", moved guidepost to this overlay
2.7.6 10/07/17
- added man_made=cutline, man_made=cairn, support for sac_scale=T5/T6 (for maps August 2017 and later)
- removed yes-value from via_ferrata_flag
Hi!
I am working with mapsforge 0.8.0 libraries, that support hillshading.
But I do not get it to work, because I think hillshading attributes should be included in the theme. Can you confirm that?
orux
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on July 18, 2017, 09:33:26 PM
Post by: eartrumpet on July 18, 2017, 09:33:26 PM
Quote from: "orux"
But I do not get it to work, because I think hillshading attributes should be included in the theme. Can you confirm that?
As far as I get it there's a element to be positioned where you think it fits in the theme (those are the default values):
<hillShading zoom-min="5" zoom-max="17" magnitude="64" layer="5" />
All resources I found:
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: orux on July 18, 2017, 09:58:57 PM
Post by: orux on July 18, 2017, 09:58:57 PM
Quote from: "eartrumpet"Quote from: "orux"
But I do not get it to work, because I think hillshading attributes should be included in the theme. Can you confirm that?
As far as I get it there's a element to be positioned where you think it fits in the theme (those are the default values):
<hillShading zoom-min="5" zoom-max="17" magnitude="64" layer="5" />
All resources I found:https://github.com/mapsforge/mapsforge/pull/922 https://raw.githubusercontent.com/mapsforge/mapsforge/master/resources/renderTheme-v6.xsd https://groups.google.com/d/msg/mapsforge-dev/Gq5pcoAEQwg/J2j_9UBYBwAJ
Thanks;
there was a bug in the library with negative longitudes, now is working with default theme.
added 0.8 mapsforge libraries to the last beta version.
I think that hillshading requires themes version v6.
orux
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: maozetung on July 26, 2017, 08:27:33 AM
Post by: maozetung on July 26, 2017, 08:27:33 AM
I would like to reproduce the online map/offline map creation behavior where you can select a very restricted area.
thank you
Title: Re: RE: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on August 06, 2017, 10:16:31 PM
Post by: eartrumpet on August 06, 2017, 10:16:31 PM
Only full download of OAM is possible.Quote from: "maozetung"is there a way to download only a portion of a map? how?
I would like to reproduce the online map/offline map creation behavior where you can select a very restricted area.
thank you
It is possible to download individual extracts in mapsforge format here, but various OAM features are missing:
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on October 06, 2017, 09:17:34 AM
Post by: eartrumpet on October 06, 2017, 09:17:34 AM
Big changes are a new overlay for extended road surface information, new via ferrata rendering, solid/dashed borders for cycleways and changed visibility information for paths without sac_scale. Check out the map key for further information. And lots of smaller changes, too:
4.2.0 06/10/17
- new optional overlay for extended road surface information of primary/secondary/tertiary/track roads and missing surface in cycling/MTB/hiking map style
- new via ferrata rendering: added non-switchable via_ferrata marking and highway=via_ferrata (for maps starting October 2017 and later)
- added dashed borders for non-paved cycleways (cycling/MTB), leisure=swimming_area, leisure=beach_resort, separate symbol for leisure=water_park, bboxweight for archipelagos and islands (for maps starting October 2017 and later), patterns for camp_site/caravan_site/golf_course (in case symbols for accomodation/sports are switched off), surface for turning circles
- changed administrative borders, all areas with strokes to areas with separate line for VTM compatibility
- removed "no trail_visibility available" marking for paths/footways without sac_scale/mtb_scale, old raw_sac_scale values (which were used in maps earlier than August 2017)
2.8.0 06/10/17
- added dashed borders for non-paved cycleways (cycling), leisure=swimming_area, leisure=beach_resort, separate symbol for leisure=water_park, bboxweight for archipelagos and islands (for maps starting October 2017 and later), surface for turning circles
- new via ferrata rendering: added non-switchable via_ferrata marking and highway=via_ferrata (for maps starting October 2017 and later)
- removed "no trail_visibility available" marking for paths/footways without sac_scale, old raw_sac_scale values (which were used in maps earlier than August 2017)
- changed administrative borders
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: Anonymous on October 24, 2017, 03:39:16 AM
Post by: Anonymous on October 24, 2017, 03:39:16 AM
I have mentioned this to you before. I find all the many different track types incredibly confusing and hard to remember.
Who can remember all this unless they bring a paper copy of the map key with them when walking...... your map key is 21 pages!
PLEASE PLEASE RELEASE A VERSION WITHOUT ALL THE TRACK TYPES !!
For the hiking style you have
Then you also have further segmentation by broken and dashed lines or two thin dashed lines !
and then you have regular uncategorized trails
and then their is roads,train lines etc etc.
Any competent hiker can use the contours to work out the steepness of the terrain.. and a number of the trail types are wrong or not marked.. some trails marked as red are just a gentle slope others are very technical steep slopes involving scrambling up cliffs..(not your fault or responsibility this is just openstreet map contributor error but it underscores the point that why have all these track types when a user cant rely on it to be reasonably accurate)
Sorry for this rant. I love your maps and very much appreciate you do all this for free. I just find this one thing very much reduces my safety (to confusing because oruxmaps also has different colours for sections of the route so easy to think im on the route but actually ive followed a different trail the same colour as the orux route) and enjoyment of using the map. If you just have an option to not show all the trail type and just mark all trail as brown then problem would be solved. If others want all the different types then it is still there.
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on October 24, 2017, 11:01:49 PM
Post by: eartrumpet on October 24, 2017, 11:01:49 PM
Everyone who is used to the way hiking paths are marked in the Eastern Alps, like this:Quote from: "wildwanderer"Who can remember all this unless they bring a paper copy of the map key with them when walking.
It's formatted for on-screen-use on a smartphone, not for printing. The relevant section is just two pages, you could print this in credit card size and attach it to your phoneQuote..... your map key is 21 pages!https://www.openandromaps.org/wp-content/users/tobias/Elevate_map_key.pdf
QuotePLEASE PLEASE RELEASE A VERSION WITHOUT ALL THE TRACK TYPES !!
Use city or cycling map style. Or a different theme:
That's just the short version, if you lookQuote- Hiking]Blue Yellow[/color] - Mountain hiking: partially steep, fall hazard possible- - Demanding mountain hiking] RedBlack[/color] - (Difficult/demanding)Alpine hiking/Via Ferrata: no trail, very exposed, climbing, glaciers
Yes, by user demand, an in a way that is not very distracting if you're not interested, and quite logic as well - the more broken the dashes, the more difficult the trail.QuoteThen you also have further segmentation by broken and dashed lines or two thin dashed lines !
Of course, should I not show them? Sac_scale should only be used in the mountains, so the majority of footways/paths will never have sac_scale. But showing them in the same color would be simply wrong, so there has to be a different one.Quoteand then you have regular uncategorized trails
Yes, it's a map. Should be there.Quoteand then their is roads,train lines etc etc.
As written above, steepness is only one of many variables that are part of sac_scale.QuoteAny competent hiker can use the contours to work out the steepness of the terrain..
Then it's up to you to correct the data, that's part of OSM. Here in the Eastern Alps the vast majority of markings is correct, this theme is made for this. Of course it can be used in every other area on this planet, and I do this as well. An my experience isn't that bad. Mostly it isn't marked, but then you have the brown paths you demand.Quoteand a number of the trail types are wrong or not marked.. some trails marked as red are just a gentle slope others are very technical steep slopes involving scrambling up cliffs..(not your fault or responsibility this is just openstreet map contributor error but it underscores the point that why have all these track types when a user cant rely on it to be reasonably accurate)
Have you ever achieved anything with something like this?QuoteSorry for this rant.
Thanks, and I have stated here and in the map legend why I do things I do:QuoteI love your maps and very much appreciate you do all this for free.
If you're not satisfied, this theme might be not for you. That was my starting point for making Elevate, and that's why the license of Elevate allows everyone to modify it to fit their need and also publish it.
You can define in OruxMaps the route that it looks nothing like anything contained in Elevate. Especially the "route path effect" helps. Also all paths in Elevate are dashed, so it's very easy to distinguish if you choose to have a solid route without "route path effect".QuoteI just find this one thing very much reduces my safety (to confusing because oruxmaps also has different colours for sections of the route so easy to think im on the route but actually ive followed a different trail the same colour as the orux route) and enjoyment of using the map.
The option would need an extra map style. I use map styles only for really major differences (hiking/cycling/mtb/city), so this won't happen.QuoteIf you just have an option to not show all the trail type and just mark all trail as brown then problem would be solved. If others want all the different types then it is still there.
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on November 28, 2017, 10:42:32 PM
Post by: eartrumpet on November 28, 2017, 10:42:32 PM
All changes:
4.2.1 28/11/17
- added zoom level visibility/priority per dominance for peaks/volcanos, osmc way colors (to waymarks overlay), blue/green/yellow arch waymark foregrounds, tower=windmill, bunker/bunker_disused, adit/adit_disused
- moved patterns for swimming areas/tourist attractions/golf courses/camping & caravan sites to special areas overlay, removed tourism=attraction from protected areas, tennis grounds/running tracks/swimming areas from sports overlay, limited tourism=attraction zoom level for Elements
- fixed ele for small volcano symbols, low zoom railway tunnels
2.8.1 28/11/17
- added zoom level visibility/priority per dominance for peaks/volcano, tower=windmill, bunker/bunker_disused, adit/adit_disused
- removed tourism=attraction symbol from various other pois, removed tourism=attraction from protected areas,
- fixed low zoom railway tunnels
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on February 13, 2018, 10:09:42 PM
Post by: eartrumpet on February 13, 2018, 10:09:42 PM
All changes:
4.2.2 13/02/18
- new access rendering: private/no/destination/permit patterns now shown per transport mode the mapstyle implies (foot/general values for hiking, bicycle/vehicle/general values for cycling/MTB, general values only for city), removed separate pattern bicycle=no
- added seasonal for waterways, surface=winter, symbols for mountain passes with direction, building=construction
- removed house number display from peaks
2.8.2 13/02/18
- new access rendering for cycling: private/no/destination/permit patterns now additionally show cycling access limits, removed separate pattern bicycle=no
- added seasonal for waterways, surface=winter, building=construction
- removed house number display from peaks, fixed living_street rendering
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on April 23, 2018, 01:50:43 PM
Post by: eartrumpet on April 23, 2018, 01:50:43 PM
4.2.3 23/04/18
- added the possibility to switch map background off (for composite maps), zoom min for area captions in Elements
- fixed tram stations, rough paved surfaces on highway=service
- changed zoom-min for playgrounds
2.8.3 23/04/18
- added zoom min for area captions in Elements
- fixed tram stations
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: Maki on April 29, 2018, 10:09:23 PM
Post by: Maki on April 29, 2018, 10:09:23 PM
"Percorsi accentato" should be "Percorsi accentuati"
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on April 30, 2018, 08:37:13 AM
Post by: eartrumpet on April 30, 2018, 08:37:13 AM
Thanks! As I don't speak Italian that helps a lot, I hope the other things make sense (those things are hard to get right even for languages you speak a bit)Quote from: "Maki"Hi Tobias, there is a typo in the Italian strings.
"Percorsi accentato" should be "Percorsi accentuati"
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on June 18, 2018, 10:33:19 PM
Post by: eartrumpet on June 18, 2018, 10:33:19 PM
All changes:
4.2.4 18/06/18
- added incline direction to MTB uphill scale, refs for ways without cycling/hiking routes (in cycling/hiking route overlays), refs for highway links, waterway=lock_gate, seperate rendering for minor aerialways, PopCat for city/town/village
- optimized cycleway rendering, cycling routes captions, waterway=dam, place rendering
- fixed Italian translation
2.8.4 18/06/18
- added incline direction to MTB uphill scale, PopCat for city/town/village, waterway=lock_gate, seperate rendering for minor aerialways
- optimized waterway=dam, place rendering
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on August 10, 2018, 09:27:57 PM
Post by: eartrumpet on August 10, 2018, 09:27:57 PM
All changes:
4.2.5 10/08/18
- added aerialway=zip_line, aerialway=station, regional cycling routes for ZL10/11 (maps of end of July 2018 and later), zoom-min for valley/canyon/peninsula, cw_lane_oneway/cw_track_oneway
- optimized rendering of settlement names rendering including improved popcat implementation (maps 06/08/18 and later), access for mtb mapstyle, mountain_range/mountain_area, oneways
- removed old cycleway tags
2.8.5 10/08/18
- added aerialway=zip_line, aerialway=station, regional cycling routes for ZL10/11 (maps of end of July 2018 and later), zoom-min for valley/canyon/peninsula, cw_lane_oneway/cw_track_oneway
- optimized rendering of settlement names rendering including improved popcat implementation (maps 06/08/18 and later), mountain_range/mountain_area
- removed old cycleway tags
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on October 08, 2018, 10:33:05 PM
Post by: eartrumpet on October 08, 2018, 10:33:05 PM
All changes:
4.2.6 08/10/18
- cycling/MTB style: changed rendering for footways/paths without mtb_scale/bicycle=yes etc., now similar as in hiking: brown means unpaved path/footway (or path without surface information); grey means paved path/footway (or footway without surface information)
- added watermill, windpump, osmc way color orange, boundary_stone
- changed symbols for bicycle shop, cinema, rearranged drawing order of some areas
2.8.6 08/10/18
- added watermill, windpump, boundary_stone
- changed symbols for bicycle shop, cinema, rearranged drawing order of some areas
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on May 01, 2019, 10:33:19 PM
Post by: eartrumpet on May 01, 2019, 10:33:19 PM
Some time ago an additional license was added, so Elevate can now be used commercially (but then changing it isn't allowed). As Elevate is now the main mapstyle for OpenAndroMaps and not the Andromaps mapstyles, and not an additional exclusive one.
Elevate 2 is now deprecated and won't be updated anymore, as it was already announced in the forum. Most apps, like c:geo recently, now support mapsforge rendertheme V4 mapstyles with mapstyle menus, therefore the parallel development doesn't make much sense anymore.
4.3.0 01/05/19
- new switchable overlays: paths + tracks (city), marking of permitted foot/cycle paths (hiking/cycling/mtb) - for countries where usage is forbidden by default or questionable
- added transformation of bridleways to paths/cycleways if using by foot/bike is legal (hiking/cycling/mtb), transformation of paths with bicycle=yes AND mtb:scale=1+ or sac_scale=T2+ to cycleways but with red dashes (cycling), ft_permit and ft_destination to other positive foot-rules
- changed old network=mtb to newer network_mtb=lay_mtb, MTB: leisure=track with mtb:scale is now rendered like MTB trails, emphasized access=no pattern
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on June 12, 2019, 10:24:57 PM
Post by: eartrumpet on June 12, 2019, 10:24:57 PM
All changes:
4.3.1 12/06/19
- added emphasized paved cycleways resp. footpaths (cycling/city), tracktype=grade1 to ZL12 in Elevate, boundary=aboriginal_lands
- changed pipeline caption size
- small fixes
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on July 08, 2019, 10:18:08 PM
Post by: eartrumpet on July 08, 2019, 10:18:08 PM
4.3.2 08/07/19
- changed hiking nodes caption from name to addr:housenumber for maps with new tag-mapping, zoom-min for admin_level=4
- added option to show sac_scale=T1/hiking on paths without bicycle=* (may no be allowed to use by bike in certain countries)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on September 26, 2019, 09:12:20 PM
Post by: eartrumpet on September 26, 2019, 09:12:20 PM
All changes:
4.3.3 26/09/19
- added surface rendering for all tracks in hiking/cycling/mtb (as tracktype isn't always consistent with surface), tourism=artwork, natural=earth_bank, natural=gully, barrier=ditch, closed=yes for man_made=groyne
- changed map background option for city - bodies of water will now show, optimized landcover rendering for multipolygons with missing inners, changed zoom level for river captions, changed footway/path areas (rendering depends now on surface), restricted generator:source to power=generator
- fixed missing casings for some tracks at ZL13, improved spanish translations
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on April 15, 2020, 01:41:43 PM
Post by: eartrumpet on April 15, 2020, 01:41:43 PM
I released a new Elevate version. This is now optimized for mapsforge 0.12 and higher (at least 0.6.1), as the OruxMaps version which uses 0.12 is still in beta phase (now beta35!), the optimizations for the curved texts are currently only usable in the beta version.
All changes:
4.4.0 15/04/20
- changed to rendertheme V5 and removed deprecated tags, so now at least mapsforge 0.6.1 is necessary
- optimized all pathtexts for mapsforge 0.12 rendering (esp. route refs and street names, increased tiny font sizes), optimized oneway symbols
- added man_made=petroleum_well, attraction=summer_toboggan, priority to playground, rendering for strict nature reserves (protect_class=1), rendering of protect_class=2/3/4 for maps starting 03/2020
- changed rendering for buildings=ruins/buildings with historic=ruins, removed symbol for ruins when they are just buildings=ruins
- removed some unnecessary slashes in waymarks ressource links, small fix for hike_node/housenumbers, code cleaned of Locus Engine optimizations
All changes:
4.4.0 15/04/20
- changed to rendertheme V5 and removed deprecated tags, so now at least mapsforge 0.6.1 is necessary
- optimized all pathtexts for mapsforge 0.12 rendering (esp. route refs and street names, increased tiny font sizes), optimized oneway symbols
- added man_made=petroleum_well, attraction=summer_toboggan, priority to playground, rendering for strict nature reserves (protect_class=1), rendering of protect_class=2/3/4 for maps starting 03/2020
- changed rendering for buildings=ruins/buildings with historic=ruins, removed symbol for ruins when they are just buildings=ruins
- removed some unnecessary slashes in waymarks ressource links, small fix for hike_node/housenumbers, code cleaned of Locus Engine optimizations
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on May 09, 2020, 08:49:27 PM
Post by: eartrumpet on May 09, 2020, 08:49:27 PM
The current Elevate version 4.4.0 is optimized for Mapsforge 0.12 and higher, which now supports curved path texts. E.g. contourline captions, street names and route refs use this. But this kind of rendering doesn't work so well in older Mapsforge versions, e.g. all current non-beta releases of OruxMaps. OruxMaps Beta uses Mapsforge 0.12 since 6 months, but it's a really long beta period, so still no final release. I wanted to release Elevate 4.4.0 after the beta phase is finished, so there was a long time only a release candidate for Elevate 4.4.0. But now there were too many changes in the maps that it was time to release it. Especially the data in the maps for protected areas changed, so users complained that Elevate 4.3.3.1 wouldn't show those anymore.
But there is still no end in sight for the OruxMaps beta phase (and maybe other apps still use an older Mapsforge version). So I decided to update Elevate 4.3.3.1 to 4.3.3.2 and release it as a legacy version. The only change is compatibility for protected areas with maps from 03/2020 or newer.
You can download it here:
https://www.openandromaps.org/wp-content/users/tobias/legacy/Elevate4332.zip (https://www.openandromaps.org/wp-content/users/tobias/legacy/Elevate4332.zip)
Quick install for OruxMaps (http://orux-mf-theme://www.openandromaps.org/wp-content/users/tobias/legacy/Elevate4332.zip)
But there is still no end in sight for the OruxMaps beta phase (and maybe other apps still use an older Mapsforge version). So I decided to update Elevate 4.3.3.1 to 4.3.3.2 and release it as a legacy version. The only change is compatibility for protected areas with maps from 03/2020 or newer.
You can download it here:
https://www.openandromaps.org/wp-content/users/tobias/legacy/Elevate4332.zip (https://www.openandromaps.org/wp-content/users/tobias/legacy/Elevate4332.zip)
Quick install for OruxMaps (http://orux-mf-theme://www.openandromaps.org/wp-content/users/tobias/legacy/Elevate4332.zip)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: orux on May 10, 2020, 09:20:03 PM
Post by: orux on May 10, 2020, 09:20:03 PM
Quote from: eartrumpet on May 09, 2020, 08:49:27 PM
The current Elevate version 4.4.0 is optimized for Mapsforge 0.12 and higher, which now supports curved path texts. E.g. contourline captions, street names and route refs use this. But this kind of rendering doesn't work so well in older Mapsforge versions, e.g. all current non-beta releases of OruxMaps. OruxMaps Beta uses Mapsforge 0.12 since 6 months, but it's a really long beta period, so still no final release. I wanted to release Elevate 4.4.0 after the beta phase is finished, so there was a long time only a release candidate for Elevate 4.4.0. But now there were too many changes in the maps that it was time to release it. Especially the data in the maps for protected areas changed, so users complained that Elevate 4.3.3.1 wouldn't show those anymore.
But there is still no end in sight for the OruxMaps beta phase (and maybe other apps still use an older Mapsforge version). So I decided to update Elevate 4.3.3.1 to 4.3.3.2 and release it as a legacy version. The only change is compatibility for protected areas with maps from 03/2020 or newer.
You can download it here:
https://www.openandromaps.org/wp-content/users/tobias/legacy/Elevate4332.zip (https://www.openandromaps.org/wp-content/users/tobias/legacy/Elevate4332.zip)
Quick install for OruxMaps (http://orux-mf-theme://www.openandromaps.org/wp-content/users/tobias/legacy/Elevate4332.zip)
Hello!
I will shortly update the version available for the mapsforge 0.13 libraries, in addition to correcting a couple of things.
The current beta will take a few more weeks, it is giving me more war than expected. I have already upgraded beta version to mapsforge 0.13
orux
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on May 11, 2020, 07:01:58 PM
Post by: eartrumpet on May 11, 2020, 07:01:58 PM
Quote from: orux on May 10, 2020, 09:20:03 PMThanks Orux, that's a great solution. No pressure from me, the current solution with the legacy version is also OK.
Hello!
I will shortly update the version available for the mapsforge 0.13 libraries, in addition to correcting a couple of things.
The current beta will take a few more weeks, it is giving me more war than expected. I have already upgraded beta version to mapsforge 0.13
orux
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on May 15, 2020, 08:45:40 PM
Post by: eartrumpet on May 15, 2020, 08:45:40 PM
Quote from: orux on May 10, 2020, 09:20:03 PMI just got the update for 7.5.10 GP. Will there also be an update for the free 7.4.22 with mapsforge 0.13?
Hello!
I will shortly update the version available for the mapsforge 0.13 libraries, in addition to correcting a couple of things.
The current beta will take a few more weeks, it is giving me more war than expected. I have already upgraded beta version to mapsforge 0.13
orux
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on July 07, 2020, 05:48:30 PM
Post by: eartrumpet on July 07, 2020, 05:48:30 PM
There's an new Elevate version available, most important a bug concerning the display of cycle route references has been fixed.
All changes:
4.4.1 07/07/20
- fixed cycle route refs
- changed route ref captions, border color for tracks, highway=service
- added refs for guideposts in waymarks overlay, waymark colors for long distance routes at zoom 9-12
All changes:
4.4.1 07/07/20
- fixed cycle route refs
- changed route ref captions, border color for tracks, highway=service
- added refs for guideposts in waymarks overlay, waymark colors for long distance routes at zoom 9-12
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on September 26, 2020, 09:21:09 PM
Post by: eartrumpet on September 26, 2020, 09:21:09 PM
A new update of Elevate is available. Many small things that have been added to the maps are now visible, and it's also possible now to switch off that paths which are allowed for cycling are rendered like cycleways.
All changes:
4.4.2 26/09/20
- added barrier=log, barrier=hedge, highway=elevator, ref for railway=platform_edge/platform, amenity=townhall, protect_class=5/11 with access=no, hiking route refs for routes with waymarks colors, added/changed rendering for (special) buildings, different rendering for minor service roads, option to disable rendering of paths with cycling permitted like cycle ways (Cycling), highway=services
- changed rendering of highway=service, rendering for protected areas (replaced access=no pattern with strict nature reserve)
- fixed error in permitted cycle paths option
All changes:
4.4.2 26/09/20
- added barrier=log, barrier=hedge, highway=elevator, ref for railway=platform_edge/platform, amenity=townhall, protect_class=5/11 with access=no, hiking route refs for routes with waymarks colors, added/changed rendering for (special) buildings, different rendering for minor service roads, option to disable rendering of paths with cycling permitted like cycle ways (Cycling), highway=services
- changed rendering of highway=service, rendering for protected areas (replaced access=no pattern with strict nature reserve)
- fixed error in permitted cycle paths option
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on January 06, 2021, 08:57:53 PM
Post by: eartrumpet on January 06, 2021, 08:57:53 PM
New year, new Elevate. For all upcoming maps starting from January this one is needed, as the tags in the maps for protected areas have changed (and doesn't work with older maps).
All Changes:
4.4.3 06/01/21
– changed protected areas including new protect_class values (starting with maps January 2021)
– added blue line for paths with cycling permitted when option render like cycle ways is disabled (like in hiking), special rendering for natural/landuse areas with bridge=yes
– fixed cycleway lanes/tracks (now only shown in cycling)
All Changes:
4.4.3 06/01/21
– changed protected areas including new protect_class values (starting with maps January 2021)
– added blue line for paths with cycling permitted when option render like cycle ways is disabled (like in hiking), special rendering for natural/landuse areas with bridge=yes
– fixed cycleway lanes/tracks (now only shown in cycling)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: DarWog on March 02, 2021, 10:07:58 PM
Post by: DarWog on March 02, 2021, 10:07:58 PM
Hi Eartrumpet & Orux
Thanks for your work : "orux + openandromaps + elevate" is just amazing !
Here is a feedback on mountain trails.
When hiking in the mountains, I keep a close look on trail difficulty, to avoid sac T5 without proper equipment for example.
In the current Elevate, the colors are confusing for me, and high-difficulty trails appear in black, and may be overlooked or confused with other marks, while they could be dangerous.
So I thought of using a green-blue-orange-red colormap for sac, but the green was getting confused with many other marks, so I converged to:
T1=black (easy), T2=blue (ok), T3=orange (hard), T4=red (dangerous/alpinism), T5=pink, and T6=purple (this one is very rare)
The visibility modifies the dash/dots, and the unrated sac are light gray.
For this, I modified manually the xml so I probably crashed a few other close legends such as tracks and horse tracks...
Is there a "simple" way / software to edit the stylesheet ?
Here is a comparison of Elevate and the modification, where I find the visibility more satisfactory for my usage.
(https://i.ibb.co/zPZ5zdS/elevate.jpg) (https://ibb.co/zPZ5zdS) (https://i.ibb.co/tBp851j/elevate-modif.jpg) (https://ibb.co/tBp851j)
Thanks for your work : "orux + openandromaps + elevate" is just amazing !
Here is a feedback on mountain trails.
When hiking in the mountains, I keep a close look on trail difficulty, to avoid sac T5 without proper equipment for example.
In the current Elevate, the colors are confusing for me, and high-difficulty trails appear in black, and may be overlooked or confused with other marks, while they could be dangerous.
So I thought of using a green-blue-orange-red colormap for sac, but the green was getting confused with many other marks, so I converged to:
T1=black (easy), T2=blue (ok), T3=orange (hard), T4=red (dangerous/alpinism), T5=pink, and T6=purple (this one is very rare)
The visibility modifies the dash/dots, and the unrated sac are light gray.
For this, I modified manually the xml so I probably crashed a few other close legends such as tracks and horse tracks...
Is there a "simple" way / software to edit the stylesheet ?
Here is a comparison of Elevate and the modification, where I find the visibility more satisfactory for my usage.
(https://i.ibb.co/zPZ5zdS/elevate.jpg) (https://ibb.co/zPZ5zdS) (https://i.ibb.co/tBp851j/elevate-modif.jpg) (https://ibb.co/tBp851j)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on March 06, 2021, 05:07:18 PM
Post by: eartrumpet on March 06, 2021, 05:07:18 PM
Elevate has been updated. There was a tiny error (two spaces were missing) that let to bad rendering in just a few apps, and MTB:scale and MTB:scale:uphill are now shown on steps.
4.4.5 06/03/21
- added mtb:scale and mtb:scale:uphill to highway=steps in MTB-mapstyle
- fixed error in cliffs
4.4.5 06/03/21
- added mtb:scale and mtb:scale:uphill to highway=steps in MTB-mapstyle
- fixed error in cliffs
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on March 06, 2021, 05:17:26 PM
Post by: eartrumpet on March 06, 2021, 05:17:26 PM
Quote from: DarWog on March 02, 2021, 10:07:58 PMFor me black is fine, as black is in our parts of the alps the color for dangerous paths (or ski pistes etc.). I use these colors as they are used on the guideposts (here's an example (https://www.schilder-werbetechnik.de/media/images/info/Schild-rehtsweisend-Alpen.jpg)), so for those familiar with the eastern alps these colors are really self-evident. But when other colors work better for you, great. I just can't provide different versions for all different colors people are used to in other parts of the world.
When hiking in the mountains, I keep a close look on trail difficulty, to avoid sac T5 without proper equipment for example.
In the current Elevate, the colors are confusing for me, and high-difficulty trails appear in black, and may be overlooked or confused with other marks, while they could be dangerous.
QuoteIs there a "simple" way / software to edit the stylesheet ?No, just a usual text editor. Look at this thread in German for hints etc.:
https://www.openandromaps.org/oam-forums/topic/grundorientierung
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on April 21, 2021, 09:14:24 PM
Post by: eartrumpet on April 21, 2021, 09:14:24 PM
With the new Elevate 4.5, there are lots of changes to the displayed POI symbols and captions. There are now more colors which depend on categories that are identical to the POI options. The categories have been resorted and all symbols have a more unified look. Also the mapstyle options now have category letters (R=Route, W=Ways, P=POIs, A=Areas). That all those changed symbols can be displayed at all I've renamed the symbol folder from ele_res to ele-res - the old one can be safely deleted.
Also lots of new POIs have been added some other changes:
4.5.0 21/04/21
- many changes in POI symbols - new colors, remodeled categories, unified symbols, reworked many symbols, category letters for mapstyle options (R=Route, W=Ways, P=POIs, A=Areas)
- restructured POI categories
- added minor contour lines in cycling for ZL13/14, some access additions, historic=stone, shop=farm, man_made=wastewater_plant, man_made=water_works, amenity=ice_cream, sport=cliff_diving, sport=free_flying, sport=climbing_adventure, sport=roller_skating, sport=skateboard, sport=miniature_golf
- changed aerial ways rendering, removed workaround for missing building tags, removed symbol for water_well/drinking (now same as drinking_water)
Also lots of new POIs have been added some other changes:
4.5.0 21/04/21
- many changes in POI symbols - new colors, remodeled categories, unified symbols, reworked many symbols, category letters for mapstyle options (R=Route, W=Ways, P=POIs, A=Areas)
- restructured POI categories
- added minor contour lines in cycling for ZL13/14, some access additions, historic=stone, shop=farm, man_made=wastewater_plant, man_made=water_works, amenity=ice_cream, sport=cliff_diving, sport=free_flying, sport=climbing_adventure, sport=roller_skating, sport=skateboard, sport=miniature_golf
- changed aerial ways rendering, removed workaround for missing building tags, removed symbol for water_well/drinking (now same as drinking_water)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on October 14, 2021, 09:09:12 PM
Post by: eartrumpet on October 14, 2021, 09:09:12 PM
Elevate has been updated with some small additions/changes.
4.5.2 14/10/21
- optimized drag_lift and chair_lift symbols, changed rendering of path/footway areas, natural=tree_row
- added rendering for closed highway=pedestrian ways, highway=construction as area, cutting=yes, hillshading (for apps that support it), waymarks: white background when background is missing
4.5.2 14/10/21
- optimized drag_lift and chair_lift symbols, changed rendering of path/footway areas, natural=tree_row
- added rendering for closed highway=pedestrian ways, highway=construction as area, cutting=yes, hillshading (for apps that support it), waymarks: white background when background is missing
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on December 05, 2021, 01:06:47 PM
Post by: eartrumpet on December 05, 2021, 01:06:47 PM
Elevate 5.0 has been released. The main changes are there to match the new v5 generations of OpenAndroMaps, which need mapsforge maps V5 support in the apps. Therefore the 5.0 version in Elevate, too.
The new version works in most parts with the older V4 maps, but it is not recommended.
All changes:
5.0 05/12/21
- made for next OAM map generation based on mapsforge maps V5, starting December 2021
- new routes and separate route refs: hknetwork=own, network=ocn, mtbnetwork=omn, ref_hike/rec_cycle/ref_mtb
- better waymarks support: OSMC waycolors orange/brown/gray, lots of additional, new OSMC foreground/backgrounds, changed rendering of OSMC waycolors
- changed symbols fee=yes symbols for parking and toilets, removed obsolete uwn/ucn networks
- added building=greenhouse
The new version works in most parts with the older V4 maps, but it is not recommended.
All changes:
5.0 05/12/21
- made for next OAM map generation based on mapsforge maps V5, starting December 2021
- new routes and separate route refs: hknetwork=own, network=ocn, mtbnetwork=omn, ref_hike/rec_cycle/ref_mtb
- better waymarks support: OSMC waycolors orange/brown/gray, lots of additional, new OSMC foreground/backgrounds, changed rendering of OSMC waycolors
- changed symbols fee=yes symbols for parking and toilets, removed obsolete uwn/ucn networks
- added building=greenhouse
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on June 07, 2022, 07:58:18 PM
Post by: eartrumpet on June 07, 2022, 07:58:18 PM
Elevate has been updated to 5.1 including several new map features and changes to low zoom rendering of emphasized paved cycle ways and colored waymarks routes.
5.1 07/06/22
– added: tracktype=grade1 to emphasized paved ways options, low zoom emphasized paved cycle ways rendering (cycling), man_made=breakwater, amenity=bicycle_repair_station, amenity=public_bookcase
– changed rendering of: man_made=groyne, waterway=weir, low zoom waymarks colored routes (hiking)
– removed: mtbnetwork=umn (MTB)
5.1 07/06/22
– added: tracktype=grade1 to emphasized paved ways options, low zoom emphasized paved cycle ways rendering (cycling), man_made=breakwater, amenity=bicycle_repair_station, amenity=public_bookcase
– changed rendering of: man_made=groyne, waterway=weir, low zoom waymarks colored routes (hiking)
– removed: mtbnetwork=umn (MTB)
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on November 06, 2022, 10:58:08 PM
Post by: eartrumpet on November 06, 2022, 10:58:08 PM
There's a new Elevate version available. The biggest change is that crags from OS data are now rendered for UK maps. But other countries get several new features, too.
All changes:
5.2 06/11/22
- added crags for UK maps, smaller symbols for parking lane/street side, amenity=parking_entrance, natural=sinkhole, natural=crater for nodes, highway=busway, names for various landuses to all map styles, mtb_role=forward/backward, landuse=plant_nursery, barrier=toll_booth, railway=train_station_entrance, railway=subway_entrance
- changed areas of touristic attractions, walls, parking zoom levels, non-route refs for smaller highways
All changes:
5.2 06/11/22
- added crags for UK maps, smaller symbols for parking lane/street side, amenity=parking_entrance, natural=sinkhole, natural=crater for nodes, highway=busway, names for various landuses to all map styles, mtb_role=forward/backward, landuse=plant_nursery, barrier=toll_booth, railway=train_station_entrance, railway=subway_entrance
- changed areas of touristic attractions, walls, parking zoom levels, non-route refs for smaller highways
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: ncohafmuta on March 04, 2023, 05:24:41 PM
Post by: ncohafmuta on March 04, 2023, 05:24:41 PM
I've been using Elevate for a bunch of years now for hiking in Oruxmaps and I always appreciate the work that goes into this and andromaps.
Admittedly, i've been using "Elevate L" for a while simply because i can see more hiking trail names at a lower zoom level. I've just upgraded to Elevate 5, so thought I should ask if the L version is no longer maintained as I suspect? If so, is there a way I can get similar results in the standard, maintained version? I tried messing with the scaling settings of the mapsforge section of Oruxmaps, but didn't seem to have an effect on what I wanted. It's not a big deal, but would be nice to know if there's a quick fix, so I can drop the old variants.
Thanks
-Tony
Admittedly, i've been using "Elevate L" for a while simply because i can see more hiking trail names at a lower zoom level. I've just upgraded to Elevate 5, so thought I should ask if the L version is no longer maintained as I suspect? If so, is there a way I can get similar results in the standard, maintained version? I tried messing with the scaling settings of the mapsforge section of Oruxmaps, but didn't seem to have an effect on what I wanted. It's not a big deal, but would be nice to know if there's a quick fix, so I can drop the old variants.
Thanks
-Tony
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on March 05, 2023, 10:56:18 AM
Post by: eartrumpet on March 05, 2023, 10:56:18 AM
Quote from: ncohafmuta on March 04, 2023, 05:24:41 PMThe size variants have been discontinued with Elevate 4 in 2016, so quite a while ago (a bit longer in Elevate 2 legacy version). They were meant for apps which didn't scale maps for high pixel density displays, but modern apps like current OruxMaps scale this automatically. So I'm not quite sure which effect you are after, as this would be a different then the intended one with Elevate L (which was just to display the map content the same on devices with ~320ppi as with ~160ppi).
Admittedly, i've been using "Elevate L" for a while simply because i can see more hiking trail names at a lower zoom level. I've just upgraded to Elevate 5, so thought I should ask if the L version is no longer maintained as I suspect? If so, is there a way I can get similar results in the standard, maintained version? I tried messing with the scaling settings of the mapsforge section of Oruxmaps, but didn't seem to have an effect on what I wanted. It's not a big deal, but would be nice to know if there's a quick fix, so I can drop the old variants.
You wrote "more hiking trail names at a lower zoom level" - more names usually can only displayed if they are smaller, so they don't overlap and cancel each other. So to display more names, you should use Settings > Maps > Mapsforge settings > Mapsforge text size with a factor <1. But I'm not sure that's what you intend, as in "L" the text size used to be larger and therefore lesse names that can be rendered.
If you meant to display trail names earlier/in lower zoom levels at all, you should use Elements theme (which is made for sparsely populated/mapped areas or countries).
Best regards,
Tobias
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: ncohafmuta on March 06, 2023, 05:52:16 AM
Post by: ncohafmuta on March 06, 2023, 05:52:16 AM
QuoteIf you meant to display trail names earlier/in lower zoom levels at all
Yeah, that's what i was after.
I've been restricting Elements use for times when i need all the elements available displayed on screen vs just the required ones when hiking (so as to not clutter my map), but i'll play with it and the text scales more and see if i get a better balance. Like i said, not a big deal at all.
Thanks for the reply!
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: nahannidog on May 22, 2023, 07:27:48 AM
Post by: nahannidog on May 22, 2023, 07:27:48 AM
Quote from: eartrumpet on March 05, 2023, 10:56:18 AMExcuse me for a tangential quesion but I have new phone(Samsung), new android OS version(10), new version of Oruxmaps GP(10.1.1 GP), new version of Colorado Topo map (2023-05-06), and consequently have navigational problems in the app! I can find where store the Mapsforge or renderthermes (SD card) but cannot find where to SELECT the different render themes. I used to use Map icon/Map tweaks/Maps forge theme/<Default, Elements or Elevate> but in v10.1.1 Map icon only gives map selection.
, you should use Settings > Maps > Mapsforge settings > Mapsforge text size with a factor <1. But I'm not sure that's what you...
I actually did stumble across a way to choose the theme, but can't believe it's the only way to select theme....I used the older version of the app to determine what the icon is for "Mapsforge theme" and added that icon to the map screen. Is the a more straightforward way to select Mapsforge theme???
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: Lenz on May 25, 2023, 12:02:05 PM
Post by: Lenz on May 25, 2023, 12:02:05 PM
Hello nahannidog,
do you use the "classical" user interface or the unified interface?
With the classical interface, the way you described still works (for me):
map symbol (top button bar) - map tweaks - mapsforge theme -> possibility to choose theme
or
left menu - mapsforge theme -> possibility to choose theme
With the unified interface:
left menu - mapsforge maps -> under map style you see all your installed themes
Best regards
Lenz
do you use the "classical" user interface or the unified interface?
With the classical interface, the way you described still works (for me):
map symbol (top button bar) - map tweaks - mapsforge theme -> possibility to choose theme
or
left menu - mapsforge theme -> possibility to choose theme
With the unified interface:
left menu - mapsforge maps -> under map style you see all your installed themes
Best regards
Lenz
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: ut on July 18, 2023, 03:15:00 PM
Post by: ut on July 18, 2023, 03:15:00 PM
Problems Elevate with Orux10.0.x GP with VTM (Rotating labels in vector: maps-Settings - Maps- Mapsforge settings - VTM map viewer'): without VTM viewer Oruxmaps works perfectly with OpenAndroMaps and "Elevate" (last version 5.2) that I can configure (mtb, city, walking,...).
However if I activate VTM viewer I can not change the theme or configure it (it works with last theme and setting I used without VTM viewer)!
Clearing the cache doesn't fix anything :-\ VTM viewer is very nice and it's a pity not to use it......x...
I got non solution from Orux..
Ps: the same thing with previus 9.7beta18 as described
https://oruxmaps.org/forum/index.php?topic=41039.msg55130#msg55130
However if I activate VTM viewer I can not change the theme or configure it (it works with last theme and setting I used without VTM viewer)!
Clearing the cache doesn't fix anything :-\ VTM viewer is very nice and it's a pity not to use it......x...
I got non solution from Orux..
Ps: the same thing with previus 9.7beta18 as described
https://oruxmaps.org/forum/index.php?topic=41039.msg55130#msg55130
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on July 18, 2023, 04:51:33 PM
Post by: eartrumpet on July 18, 2023, 04:51:33 PM
Sounds like an OruxMaps issue, as the map menus work well with other apps that use VTM. Although Elevate is best used with mspsforge, as it uses rendering styles/rules that are not available in VTM.
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: ut on July 19, 2023, 10:05:02 AM
Post by: ut on July 19, 2023, 10:05:02 AM
Hi Eartrumpet, thanks for the prompt reply.. which is exactly what I was afraid of!
I will continue without VTM as the Elevate theme with its configurability is really indispensable for me!
...and thanks again for your great work! ;D
I will continue without VTM as the Elevate theme with its configurability is really indispensable for me!
...and thanks again for your great work! ;D
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: GeorgeF on November 11, 2023, 04:54:59 PM
Post by: GeorgeF on November 11, 2023, 04:54:59 PM
Elevate_Winter on OruxMaps AM
Good morning, I have both OruxMaps GP on my smartphone and OruxMaps AM on my Windows 11 PC purchased with Amazon Appstore.
The Elevate 5.3.1 theme shows the altitude contour lines but the ski slopes appear in light blue, almost invisible. With the default theme the ski slopes appear colored according to the difficulty "easy", "intermediate", "advanced", etc. , but the level curves disappear.
On this site I found the theme "Elevate_Winter":
https://www.senotto.de/Tipps_Tricks/GPS/OAM_Winter/OAM_Winter.html
which has both contour lines and colored ski slopes.
On the smartphone with OruxMaps GP I managed to install the "Elevate_Winter" theme, however on the Windows 11 PC with OruxMaps AM I couldn't find the folder where to insert the "Elevate_Winter.xml" file and its "ele-res" folder, so it doesn't work .
I ask if it is possible that in the future the "Elevate_Winter" theme will be made official so that it can also be installed on the Windows 11 PC with OruxMaps AM.
Thank you
George
Good morning, I have both OruxMaps GP on my smartphone and OruxMaps AM on my Windows 11 PC purchased with Amazon Appstore.
The Elevate 5.3.1 theme shows the altitude contour lines but the ski slopes appear in light blue, almost invisible. With the default theme the ski slopes appear colored according to the difficulty "easy", "intermediate", "advanced", etc. , but the level curves disappear.
On this site I found the theme "Elevate_Winter":
https://www.senotto.de/Tipps_Tricks/GPS/OAM_Winter/OAM_Winter.html
which has both contour lines and colored ski slopes.
On the smartphone with OruxMaps GP I managed to install the "Elevate_Winter" theme, however on the Windows 11 PC with OruxMaps AM I couldn't find the folder where to insert the "Elevate_Winter.xml" file and its "ele-res" folder, so it doesn't work .
I ask if it is possible that in the future the "Elevate_Winter" theme will be made official so that it can also be installed on the Windows 11 PC with OruxMaps AM.
Thank you
George
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on November 30, 2023, 09:07:44 PM
Post by: eartrumpet on November 30, 2023, 09:07:44 PM
Quote from: GeorgeF on November 11, 2023, 04:54:59 PMYou should ask the creator of the fork if it's possible to get a proper installation file for Windows.
On the smartphone with OruxMaps GP I managed to install the "Elevate_Winter" theme, however on the Windows 11 PC with OruxMaps AM I couldn't find the folder where to insert the "Elevate_Winter.xml" file and its "ele-res" folder, so it doesn't work .
I ask if it is possible that in the future the "Elevate_Winter" theme will be made official so that it can also be installed on the Windows 11 PC with OruxMaps AM.
For your second question: I don't intend to include a Winter mapstyle because of various reasons, all have been discussed in the OpenAndroMaps forum.
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: ut on December 01, 2023, 04:19:39 PM
Post by: ut on December 01, 2023, 04:19:39 PM
Hi GeorgeF, you say " ..however on the Windows 11 PC with OruxMaps AM I couldn't find the folder where to insert the "Elevate_Winter.xml" file and its "ele-res" folder, so it doesn't work.. "
You can find the solution here
https://oruxmaps.org/forum/index.php?topic=43118.msg56913#msg56913 reply by Lenz (very clear, thanks!)
That is Orux runs in a virtual machine called WSA on your pc and you have to share files between Windows and Android (WSA).
You can find the solution here
https://oruxmaps.org/forum/index.php?topic=43118.msg56913#msg56913 reply by Lenz (very clear, thanks!)
That is Orux runs in a virtual machine called WSA on your pc and you have to share files between Windows and Android (WSA).
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: GeorgeF on December 05, 2023, 05:28:37 PM
Post by: GeorgeF on December 05, 2023, 05:28:37 PM
Nothing, today I tried again to repurchase this OruxMaps AM app. I didn't succeed.
I started from scratch, also reinstalled Amazon Appstore, I started again from this app on Windows 11:
Start – all apps - Amazon Appstore:
I don't understand where the problem is, I had already tried a few days ago, it's a continuous loop with no exit. I have to give up.
Now I'm using Garmin BaseCamp on windows 11
Anyway, thanks for the replies.
George
I started from scratch, also reinstalled Amazon Appstore, I started again from this app on Windows 11:
Start – all apps - Amazon Appstore:
I don't understand where the problem is, I had already tried a few days ago, it's a continuous loop with no exit. I have to give up.
Now I'm using Garmin BaseCamp on windows 11
Anyway, thanks for the replies.
George
Title: Re: Elevate - Openandromaps hiking, cycling, sightseeing themes
Post by: eartrumpet on November 17, 2024, 08:31:24 PM
Post by: eartrumpet on November 17, 2024, 08:31:24 PM
A new Elevate version has been released which brings mainly the rendering of new map content.
5.5 17/11/24
- added highway=passing_place, amenity=lounger, added ebike_charging_commercial/ebike_charging_station/ebike_charging_public/ebike_charging_customer, barrier=cattle_grid, highway=ladder
- fixed summer_toboggan captions, changed mini_roundabouts, changed zoom-min for bays
5.5 17/11/24
- added highway=passing_place, amenity=lounger, added ebike_charging_commercial/ebike_charging_station/ebike_charging_public/ebike_charging_customer, barrier=cattle_grid, highway=ladder
- fixed summer_toboggan captions, changed mini_roundabouts, changed zoom-min for bays