Title: ANT+ power sensor
Post by: joergjung on April 29, 2014, 01:09:22 AM
Post by: joergjung on April 29, 2014, 01:09:22 AM
Best regards,
Joerg
Title: Re: ANT+ power sensor
Post by: orux on May 12, 2014, 06:12:56 PM
Post by: orux on May 12, 2014, 06:12:56 PM
Oruxmaps is my very much preferred app to track my bike activities. I now plan to use a power sensor in order to collect power data in addition to the ususal cadence and HR data. Is it possible to connect a powermeter (powertap in my case) to Oruxmaps via the ANT+ protocol?Quote from: "joergjung"
Best regards,
Joerg
Hi, thanks;
that sensor is a bit complicated, I will try in the future,
orux
Title: Re: ANT+ power sensor
Post by: joergjung on April 03, 2015, 09:14:39 PM
Post by: joergjung on April 03, 2015, 09:14:39 PM
thank you for the implementation of the power sensor. I tested it during my first ride this year and it seemed to work, i.e. the power data were displayed during my tour. However, I was not able to download the data from the Galaxy S5 which I used to collect the data. The gpx file only contained the usual location data, but no power data. What do I need to do to get the data into ecxel or golden cheetah?
Joerg
Title: Re: ANT+ power sensor
Post by: fabrylama on January 22, 2016, 09:54:13 PM
Post by: fabrylama on January 22, 2016, 09:54:13 PM
Thank you again for this amazing app
Title: Re: ANT+ power sensor
Post by: fabrylama on January 31, 2016, 11:26:15 PM
Post by: fabrylama on January 31, 2016, 11:26:15 PM
Title: Re: ANT+ power sensor
Post by: Uli on February 29, 2016, 08:52:50 AM
Post by: Uli on February 29, 2016, 08:52:50 AM
But I will buy only when the data can be shown on Oruxmaps.
Is there anyone who does know or can confirm that?
Title: Re: ANT+ power sensor
Post by: orux on March 08, 2016, 09:30:30 PM
Post by: orux on March 08, 2016, 09:30:30 PM
Hi Orux, in a few days I'm going to buy an ant+ power meter, I already did some testing and the power data are showed correctly, but without the rolling averages (3, 5, 10, 30 seconds window) data fields, as in the garmin units, it's almost impossible to use oruxmaps with a power meter because the power data in inherently too jumpy.Quote from: "fabrylama"
Thank you again for this amazing app:!: and please consider adding these data fields. Thanks
hello;
What about the accumulated values?
Please, could you tell us which fields are working fine,
orux
Title: Re: ANT+ power sensor
Post by: cyclingfun on November 29, 2016, 07:13:30 PM
Post by: cyclingfun on November 29, 2016, 07:13:30 PM
The problem is, as we can read here in post by joergjoung from 03. April 2015 - gpx contain no Power Data.
We need
Are there any plans to implements possibility to save track as Fit or Tcx????
Title: Re: ANT+ power sensor
Post by: potifa on January 18, 2017, 02:05:46 PM
Post by: potifa on January 18, 2017, 02:05:46 PM
Title: Re: ANT+ power sensor
Post by: orux on February 04, 2017, 05:59:28 PM
Post by: orux on February 04, 2017, 05:59:28 PM
+1 for this one. Displaying current power is just one side of the coin. I've also recently acquired a power meter and started to use it for indoor training. While it's still winter, soon this will change, and I'll still want to use power data for training analysis. Hence, it would be great if Oruxmaps could offer support for .fit files. I'd very much love to avoid to buy another device which for everything but power analysis would be completely redundant.Quote from: "potifa"
Hello,
last beta version adds support to export tracks in FIT, TCX and CSV formats; experimental, not all sensors data available.
orux
Title: Re: ANT+ power sensor
Post by: cyclingfun on March 15, 2017, 02:52:42 PM
Post by: cyclingfun on March 15, 2017, 02:52:42 PM
Can you help me where in seetings is hidden fit, tcx choice.
Title: Re: ANT+ power sensor
Post by: potifa on March 28, 2017, 08:31:58 PM
Post by: potifa on March 28, 2017, 08:31:58 PM
Title: Re: ANT+ power sensor
Post by: 6745th@web.de on March 29, 2017, 03:19:49 PM
Post by: 6745th@web.de on March 29, 2017, 03:19:49 PM
Goto tracklist, mark track and export.
Title: Re: ANT+ power sensor
Post by: cyclingfun on March 30, 2017, 09:44:36 PM
Post by: cyclingfun on March 30, 2017, 09:44:36 PM
Unfortunatelly it looks like it is not working with my 4iii Power Meter. In 2 weeks i will try how it works with Stages Power Meter.
In
In
More test i will do on Saturday.
Title: Re: ANT+ power sensor
Post by: cyclingfun on April 16, 2017, 05:52:24 PM
Post by: cyclingfun on April 16, 2017, 05:52:24 PM
( in tcx or fit i see cadence from Power Meter but i don't see power values)
On screen during a ride i see power from both Stages and 4iii.
( I have tried in Orux Beta and in Orux Donate)
Title: Re: ANT+ power sensor
Post by: Perdix on January 26, 2018, 07:35:14 AM
Post by: Perdix on January 26, 2018, 07:35:14 AM
are there plans for power meter BLE support in the future? Most Smartphone have BLE, but no ANT+ and more and more power meters have BLE lately.
BR
Perdix
Title: Re: ANT+ power sensor
Post by: Leachim on March 05, 2018, 05:48:42 PM
Post by: Leachim on March 05, 2018, 05:48:42 PM
(I'm riding about 10,000 to 15,000 kms a year.) My longest ride (with OruxMaps) was a 3,500 km cycling tour from Vienna to Lisbon last summer.)
Since last october I'm the proud owner of a Quarq Dzero power meter.
It's current power output is display correctly (and quicker than on a Garmin Edge!).
But current power has nearly no practical use because the values are jumping (and that's normally the
case with a power meter). So I think users of a power meter would need "sliding averages" (3, 5, 10,
30 seconds) to have meaningful data on their display.
The second problem: in none of the supported file formats the power data is exported.
Is there a chance that these issues could get addressed in the future?
Sincerely,
Michael
Title: Re: ANT+ power sensor
Post by: Perdix on August 02, 2018, 08:48:49 PM
Post by: Perdix on August 02, 2018, 08:48:49 PM
Thank you for supporting BLE powermeters now! It works with the latest version of Stages powermeters.
Another function appreciated is support of power and cadence at the same time. For now, one can only select either power or cadance over BLE.
Keep up the great work, it is the best app on my phone!
BR
Title: Re: ANT+ power sensor
Post by: skinnie on July 17, 2020, 11:58:26 PM
Post by: skinnie on July 17, 2020, 11:58:26 PM
Sorry to bump such old thread.
Are BLE power meters supported on current versions?
I ask this because I am thinking of buying an android phone to use oruxmaps for navigating and training (have now a stages gen 3 powermeter (Ant+ and ble, but the phone only has ble).
Are BLE power meters supported on current versions?
I ask this because I am thinking of buying an android phone to use oruxmaps for navigating and training (have now a stages gen 3 powermeter (Ant+ and ble, but the phone only has ble).
Title: Re: ANT+ power sensor
Post by: laurentde . on October 26, 2020, 09:39:12 AM
Post by: laurentde . on October 26, 2020, 09:39:12 AM
Hello,
Thanks a lot for the creation of this app which is so powerfull !!!
I'm desperately searching for an alternative for my Garmin edge(s) ... they don't last very long and after the usual 2 year warranty period Garmin doesn't offer any replacement off course ...
I already used 5 of them in ten years.
I like a lot Oruxmaps that I started using since a couple of weeks but as others already suggested, there is a need for a slight evolution in the handling of the powerdata:
1) First of all there is no power data in the exported files (I use this data a lot for building up condition towards specific events and it gives me a fair good idea about my condition, workload, fatigue etc )
2) To use powerdata while riding I need at least sliding averages.
Is it planned to have those in a near future ?
Thanks a lot for the creation of this app which is so powerfull !!!
I'm desperately searching for an alternative for my Garmin edge(s) ... they don't last very long and after the usual 2 year warranty period Garmin doesn't offer any replacement off course ...
I already used 5 of them in ten years.
I like a lot Oruxmaps that I started using since a couple of weeks but as others already suggested, there is a need for a slight evolution in the handling of the powerdata:
1) First of all there is no power data in the exported files (I use this data a lot for building up condition towards specific events and it gives me a fair good idea about my condition, workload, fatigue etc )
2) To use powerdata while riding I need at least sliding averages.
Is it planned to have those in a near future ?