Hi Orux. GREAT app- been using it for a few years now in aerial survey and have success making my own maps (USGS Topo's) and recording tracks etc.
Issue- I usually load about three to 5 kmz layers for lines, points and labeled waypoints. When I go to "Load "layer it shows all the layers with the checkbox but will only load one of the layers checked if I check four or five to load. So I have to go through the load layer process 4 or 5 times to get all the layers I need.
I'm running v. 7.0.2. Is this fixed in 7.2.7 or am I doing something wrong?
Tom
Quote from: Pointaero post_id=12971 time=1520104584 user_id=2829
Hi Orux. GREAT app- been using it for a few years now in aerial survey and have success making my own maps (USGS Topo's) and recording tracks etc.
Issue- I usually load about three to 5 kmz layers for lines, points and labeled waypoints. When I go to "Load "layer it shows all the layers with the checkbox but will only load one of the layers checked if I check four or five to load. So I have to go through the load layer process 4 or 5 times to get all the layers I need.
I'm running v. 7.0.2. Is this fixed in 7.2.7 or am I doing something wrong?
Tom
Hello;
With the last version you can load more than one file each time,
orux
Hello again Orux:
I have tried loading multiple kmz files at the same time but it still crashes the app unless I load only one at a time, even in 7.2.7. Any fix yet?
Also, in the newer 7.0 and higher versions, if I start a new segment in the same track, the app does a continue track instead of a segment track- in other words- it it connects the previous and new segment with a straight line. It used to allow seperate segments without the continued line but the 7.0 versions won't do this anymore.
Also having problems with maps now. I have numerous maps for the same areas and when I change to one map it works fine unless i try to zoom in on that map. At that point it changes back to the previous map. I have selected "never" in the auto load options but there's no change. Also my maps will not refresh. Do I need to do a data clear in the apps settings on the device.
My device is a Samsung Tab S2, 32gb & 128gb card. The maps are stored on the card.
Tom
Quote from: Pointaero post_id=14350 time=1538542554 user_id=2829
Hello again Orux:
I have tried loading multiple kmz files at the same time but it still crashes the app unless I load only one at a time, even in 7.2.7. Any fix yet?
Also, in the newer 7.0 and higher versions, if I start a new segment in the same track, the app does a continue track instead of a segment track- in other words- it it connects the previous and new segment with a straight line. It used to allow seperate segments without the continued line but the 7.0 versions won't do this anymore.
Also having problems with maps now. I have numerous maps for the same areas and when I change to one map it works fine unless i try to zoom in on that map. At that point it changes back to the previous map. I have selected "never" in the auto load options but there's no change. Also my maps will not refresh. Do I need to do a data clear in the apps settings on the device.
My device is a Samsung Tab S2, 32gb & 128gb card. The maps are stored on the card.
Tom
Hello;
do you talk about 7.3.7 version?
You can load more than one kmz with no problems; maybe a memory problem. The size of the kmz,s you want to load?
The start new segment works fine. Are you sure you click 'new segment'?
You have to disable settings--maps--zoom settings--auto load map with zoom.
orux
Hello again:
I have loaded 7.3.7 and all errors are fixed! Thanks much. :D
Tom