Messages

ok seen! thank you so much for the url  

hello



on the oruxmaps site I do not see anymore today the link to download the last version (7.4.22)?  she is still available?

Thanks for your help.  and yes I agree that the setting may vary from one mobile to another except in my case the wrong elevation is only on oruxmaps and not on other gps applications installed on this mobile?



Gracias por tu ayuda.  y sí, estoy de acuerdo en que la configuración puede variar de un móvil a otro, excepto en mi caso, la altitud incorrecta es solo en oruxmaps y no en otras aplicaciones gps instaladas en este móvil.

hello



on a mobile wiko tommy 3 I see totally different values ​​for the elevation between the gps status application  (ver 9.0.183) and orumaps (ver 7.4.22).  gps status indicates for example 70 meters (it is the good altitude by comparing on another mobile) and oruxmaps indicates 2 meters @  how can I solve this?

ok seen.  thank you for this method that I did not know  

Hello.  how is it possible to see the type of online map that is set on my mobile in Oruxmaps because a friend has just installed Oruxmaps for the first time this afternoon and the map he had by default seemed more detailed than the one  that I have on my mobile (and that I use for a long time).  We are both with Oruxmaps version 7.4.22 and the export / import profile of his mobile to mine does not change the type of map either.



thank's for your help  

Thank you very much for your advice. Meanwhile, since I did not find a way to remove these beep by setting, I reinitialized my profile in Oruxmaps (I load the default profile) and the problem was solved. By cons I have no more information on what generated these beeps ...

Thank you for this information



Actually activating the GPS before the recording starts well immediately  

Hello



in orxumaps 7.3.4 when i start en record and after the GPS fix the track puts between 5 and 10 seconds before starting to record. is it possible to shorten this duration so that it starts immediately ?



regards

Hello



In Oruxmaps 7.3.4 how to disable the sound (beep) when I start a record. the same for the second beep once the record starts after a few 5 - 10 seconds. I looked in the menu "sound" but everything is yet disabled?



Thanks for your help  

Hello





some time when i recording a trace I have some points in error : the track is deviated by several tens of meters with an incorrect altitude also (which deviates considerably from the plot).

I think it's due to poor GPS reception but I'm not sure ... this then forces me to manually edit the .gpx file with GPX Editor



If it is caused by the GSP is it possible to set Oruxmaps so that it ignores these points if the GPS reception is not sufficient?



currently my GPS config in Oruxmpas (V.7.2.13) is set like this:

minimum duration: 2 seconds (recommended)

minimum distance: 20 m (recommended)

GPS accuracy: 0m (always)



My device : Samsung A3 2017. Android 7.0.







Thanks for your help  

Hello,



Ok, thank you so much I did not think it could be that!  

there is a documentation where it is indicated so that if I have other questions I can first consult this documentation?



Jerome

Hello everyone,



I ask your help to know what the value indicated after the distance of the trace means. I have a record of 5.40 km and then it is indicated (---> 2.78 km). what is this 2nd value?



thank you for your help

Hello,



For the default track name is it possible to set the name by default with the time and date and not only blank ?

if possible where is the parameter to configure ?

thanks

 

Hello,



I have used for some time Oruxmaps on Android and I wanted to congratulate you on this wonderful application which is very high-performance Shall specify during my walks !



However, I have two minor complaints (Version 6.0.7 android use on a Samsung Galaxy S4 Mini):



- On the statistics of a trace, it appears with French language, 2 average speeds "Vitesse moyenne": see screenshot 1 --> http://www.casimages.com/i/150305113207205309.jpg">http://www.casimages.com/i/150305113207205309.jpg



- Max speed displayed on stastitiques (marked in green on the screeshot 1) is different on the chart see screeshot 2 --> http://www.casimages.com/i/150305113300559225.jpg">http://www.casimages.com/i/150305113300559225.jpg



These are only minor bugs, I just wanted to point out to improve the application.



Best Regards



Jerome