how to disable sound when starting a record

Started by JeromeM, September 13, 2018, 01:44:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

JeromeM

September 13, 2018, 01:44:33 PM Last Edit: January 01, 1970, 01:00:00 AM by Guest
Hello



In Oruxmaps 7.3.4 how to disable the sound (beep) when I start a record. the same for the second beep once the record starts after a few 5 - 10 seconds. I looked in the menu "sound" but everything is yet disabled?



Thanks for your help  ;)

orux

#1
September 22, 2018, 04:37:46 PM Last Edit: January 01, 1970, 01:00:00 AM by Guest
Quote from: JeromeM post_id=14211 time=1536839073 user_id=2850
Hello



In Oruxmaps 7.3.4 how to disable the sound (beep) when I start a record. the same for the second beep once the record starts after a few 5 - 10 seconds. I looked in the menu "sound" but everything is yet disabled?



Thanks for your help  ;)


There is no beep if all is disabled in sound settings.



Other sources of 'sounds' can be:

--some sensors, like Vario

--Following route/Wpt. navigation alarms (far from route, for example).

--KMZ overlay exclusion zone/geofence

--...





orux

Stef

#2
September 23, 2018, 07:44:49 AM Last Edit: January 01, 1970, 01:00:00 AM by Guest
The sound is from the altimeter calibration.

JeromeM

#3
September 24, 2018, 10:37:04 AM Last Edit: January 01, 1970, 01:00:00 AM by Guest
Thank you very much for your advice. Meanwhile, since I did not find a way to remove these beep by setting, I reinitialized my profile in Oruxmaps (I load the default profile) and the problem was solved. By cons I have no more information on what generated these beeps ...

davidih

#4
October 13, 2018, 10:48:31 AM Last Edit: January 01, 1970, 01:00:00 AM by Guest
I also had this problem. reinstallation helped
Print
Go Up Pages1
User actions