Waypoints locations don't match in height diagram

[tstreibl]

Hi Orux,

in the height diagram waypoints have correct height but are located at a wrong distance, as you can see in fig. 1. In fig. 1 only 11 waypoints show up, but the track is 1165km long and has 12 waypoint ("Tag 12" is missing at the end). Furthermore all waypoints are located directly on the track, which is obviously not the case in the height diagram (even after height correction within the app with very accurate dem files).

This can further be proofed by taking a terrain-height profile near "Tag 5" (which is nearly 400m off in height in the height diagram) from within the app, as shown in Fig. 2 and Fig. 3. Fig. 3 shows that waypoint 5 and the track around waypoint 5 is roughly around 1160m height (so waypoint 5 has correct height, which is matching with the dem-cursor-height readings within the app). As you can see in fig. 4 waypoint 5 is locatet around 430km distance but should be correctly placed at around 350km distance, at the peak after "Tag 4" in the height diagram (see arrow).

I'll post the track in the next comment, since only 4 attachements are allowed. The track was created in brouter (outside the app).

I used V. 10.04 GP. Latest beta and V. 9.6.3. AP show the same.

[tstreibl]

the track...