Missing realtime data, like height, coordinates etc. in the dashboard ...

hans1 · October 22, 2024, 01:10:59 PM

Hi all

a strange problem:

In the dashboard the display of all parameters lack data contents.
But the data are available and are collected, as they are correctly monitored and stored in the track-file and can be seen after the end of tracking.

Why don't they fill the dashboard. What can be done to make the fill the dashboard with realtime data?

Best regards Hans

Tronpo · October 22, 2024, 02:40:57 PM

Quote from: hans1 on October 22, 2024, 01:10:59 PMHi all

a strange problem:

In the dashboard the display of all parameters lack data contents.
But the data are available and are collected, as they are correctly monitored and stored in the track-file and can be seen after the end of tracking.

Why don't they fill the dashboard. What can be done to make the fill the dashboard with realtime data?

Best regards Hans

Hello, what data are you talking about specifically? Speed, altitude, time... Recording.... total....
Give us more clues, which version of OruxMaps ?

A screenshot of the dashboard elements for example

Best regards

hans1 · October 22, 2024, 11:42:36 PM

The version is Oruxmaps v. 10.7.4 GP

In the bottom You see the symbols without any data added.

Tronpo · October 23, 2024, 06:14:00 AM

Hello, make sure you have GPS active, it is necessary for fields that do not show data, I recommend you change the color of the text of the data fields you do not see anything. You can check that the heart rate monitor and zoom data are displayed even though they are not very visible.
Depends on the data field requires to have active functions, GPS, record route, Dem files etc.

hans1 · October 23, 2024, 09:58:40 AM

@Tronpo
Of cause each of the sensors, including GPS was activated. And obviously these data were also accessable to Oruxmaps, as they were stored correctly during monitoring of the track i had run. And also the position was correctly shown with the red arrow all the time.
They just do not appear as numbers in the bottom of the map in the textfield, shown in the figure.
The background of this textbox is set to semi transparent.
Also this behaviour was not observed in older versions I had used previously.

best regards Hans